| DRIVER CHIP |
1306 |
| INTERFACE |
3-wire SPI, 4-wire SPI, I2C |
| RESOLUTION |
128*64 |
| DISPLAY SIZE |
0.96inch |
| COLORS |
1/4 yellow section, 3/4 blue section |
| VISIBLE ANGLE |
>160° |
| OPERATING TEMP. (℃) |
-20~70 |
| STORAGE TEMP. (℃) |
-30~80 |
| OPERATING VOLTAGE |
3.3V / 5V |
| APPLICABILITY |
Hardware platforms such as Raspberry Pi/Jetson Nano/Arduino/STM32 |
Description :
0.96inch OLED, SPI/I2C Interfaces, Angled/Horizontal Pinheader
Key Parameters
| DRIVER CHIP |
1306 |
| INTERFACE |
3-wire SPI, 4-wire SPI, I2C |
| RESOLUTION |
128*64 |
| DISPLAY SIZE |
0.96inch |
| COLORS |
1/4 yellow section, 3/4 blue section |
| VISIBLE ANGLE |
>160° |
| OPERATING TEMP. (℃) |
-20~70 |
| STORAGE TEMP. (℃) |
-30~80 |
| OPERATING VOLTAGE |
3.3V / 5V |
| APPLICABILITY |
Hardware platforms such as Raspberry Pi/Jetson Nano/Arduino/STM32 |
Interface
| PIN NO. |
SYMBOL |
DESCRIPTION |
| 1 |
VCC |
Power positive (3.3~5V power input) |
| 2 |
GND |
Ground |
| 3 |
NC |
NC |
| 4 |
DIN |
Data input |
| 5 |
CLK |
Clock signal input |
| 6 |
CS |
Chip selection, low active |
| 7 |
D/C |
Command signal, low level for command, high level for data |
| 8 |
RES |
Reset signal, low active |
Hardware Config
| MODE/INTERFACE |
BS0/BS1 |
DIN |
SCK |
| 3-wire SPI |
1/0 |
MOSI |
SCLK |
| 4-wire SPI |
0/0 |
| I2C |
0/1 |
SDA |
SCL |
Ordering Info
The 0.96inch OLED provides 2 options for the onboard pinheader:
- 0.96inch OLED (A): angled/horizontal pinheader
- 0.96inch OLED (B): straight/vertical pinheader
Package Included :
0.96inch OLED (A) x 1
