Description:
This is an XH-W1209 12V Digital Temperature Controller Module W/ Display and NTC Waterproof Temperature Sensor. W1209 Mini thermostat Temperature controller is a low-cost 12V Temperature controller with a 7-segment display and 3-switch keypad for setting temperature and other parameters. The module features an NTC thermistor temperature sensing and has an accuracy of 0.1 C.
The XH-W1209 12V Digital Temperature Controller Module W/ Display and NTC Waterproof Temperature Sensor is an incredibly low-cost yet highly functional thermostat controller. With this module, you can intelligently control power to most types of electrical devices based on the temperature sensed by the included high-accuracy NTC temperature sensor.
Although this module has an embedded microcontroller no programming knowledge is required. 3 tactile switches allow for configuring various parameters including on & off trigger temperatures. The onboard relay can switch up to a maximum of 240V AC at 5A or 14V DC at 10A. The current temperature is displayed in degrees Centigrade via its 3 digit seven segment display and the current relay state by an onboard LED.
Specifications:
- Temperature Range: -50-110 ℃
- Temperature Control Mode: ON / OFF
- Control Accuracy: 0.1 ℃
- Hysteresis Accuracy: 0.1℃
- Refresh Rate: 0.5S
- High-Temperature Protection： 0-110℃
- Supply Voltage: DC 12V
- Static Current: ≤ 35MA, attract current ≤ 65MA
- Output Voltage: DC 12V
- Output Power: 20A relay
- Measurement Input: NTC (10K 0.5%) Waterproof Sensor
- Environmental Requirements: -10 ~ 60 ℃ ，Humidity 20% -85%
- Resolution: When temperature is 0.1℃, the resolution is -9.9~99.9, other temperature segment is 1℃
How To Use:
- Connect the power supply and the load, you can supply to the controller
- It is displayed as a measured temperature
- Press the SET button, the display flashes the temperature
- Press - to set the desired temperature
- After setting press SET to confirm the return
- The controller automatically performs the relay by setting off
Lights, LED Status Descriptions:
- Indicator: Off The relay is switched off, Always indicate the relay is closed.
- LED: Shows LL is the sensor open, showing HH is out of range, the thermostat will be forced to close the relay, the display --- as high-temperature protection.
Application:
- To measure and display the temperature
- Turn any application ON/OFF based on temperature reading. (Both AC and DC)
- Example Project:- A. Fire alarm system. B. Auto cut off Electric Water Heater
Package Included:
1x W1209 50~110°C 12V DC Digital Thermostat Temperature Control Switch Sensor Module