Introduction
This is a perfect kit for the starter to study Arduino programming with High-quality components. You can learn and do many experiments, such as lighting up the LED and then getting the LED to be an output display. Electronics component High-quality Arduino UNO R3 Compatible. 100% compatible with Arduino UNO R3 MEGA 2560 NANO Arduino kit.
Kit Includes
Item Name | Quantity |
Arduino UNO | 1 |
Arduino Uno USB Cable | 1 |
1 | |
830 point breadboard | 1 |
(Red, Green, Yellow, Blue)Led - 4 pcs each | 15 |
Resistor (220 ohm ,10k , 1k) - 10 pcs each | 30 |
10 Pin Dupont Line ( Male to male ) | 1 |
10k Potentiometer | 1 |
Active Buzzer | 1 |
Passive Buzzer | 1 |
74HC595N Shift Register IC | 1 |
Infrared receiving Head Sensor | 1 |
LM35 Temperature Sensor | 1 |
Flame Sensor | 1 |
Roll Ball Switch ( Buttons) | 2 |
LDR ( Photoresistor) 5mm | 3 |
Button Switch Cap - yellow | 5 |
IR Remote Control | 1 |
1 Digit 7 segment display | 1 |
4 Digit 7 Segment Display | 1 |
8*8 Dot matrix Module | 1 |
ULN2003 Stepper Motor Driver | 1 |
5v Stepper Motor | 1 |
SG-90 Servo Motor | 1 |
16*2 LCD Display | 1 |
PS2 Joystick Module | 1 |
DHT11 Temperature and Humidity Sensor Module | 1 |
Water Level Measurement Sensor Module | 1 |
RC522 RFID Card Module | 1 |
Sound Sensor Module | 1 |
5v 1-Channel Relay Module | 1 |
RTC DS1302 Module | 1 |
16 Buttons (4*4) Matrix Module | 1 |
RGB Led | 1 |
RGB Led 3 Module | 1 |
9v Battery Snapper | 1 |
ADXL345 Acceleration Sensor | 1 |
Ultrasonic Distance Sensor HC-SR04 | 1 |
PIR Motion Sensor | 1 |
Breadboard Power Supply Module | 1 |
DC Motor | 1 |
555 Timer IC | 1 |
Tilt Switch | 1 |
Push buttons - Small | 1 |
Capacitor (104 PF, 10uf) | 1 |
NPN Transistor (8050) | 2 |
PNP Transistor(8550) | 2 |
1N4148 Diode | 2 |
1N4001 Diode | 2 |
4 cell battery holder | 1 |
Jumper wire( male to male ) | 40 |
Jumper wire( male to Female ) | 20 |
Resistor Band Card | 1 |
Required Software
Arduino IDE 1.8.10 (programmable platform for Arduino)
Click To Download: https://www.arduino.cc/en/Main/Software