
SUNLU Water-Wash Standard Resin - Grey, 1kg
SUNLU Water-Wash Standard Resin is a liquid photopolymer for detailed UV resin 3D printing. This listing supplies one 1kg bottle in Grey, called Light Gray in SUNLU's colour range. Its water-washable formulation lets you clean uncured residue from printed parts using water rather than making alcohol the normal washing medium. Choose it for display pieces, ornaments, figurines and visual prototypes where a rigid model and clear surface detail matter. This is the ordinary Water-Wash Standard formulation, not Water-Wash ABS-Like, 14K Water-Wash or standard non-water-washable resin.
Detail-focused printing with a simpler wash stage
The manufacturer describes this resin as an entry-level water-washable rigid material with good detail reproduction. Grey gives a neutral base for examining shapes and surface features before further finishing. It is a resin-printer consumable, not a spool of filament, and cannot be used in an FDM filament extruder. Check that your printer supports the resin's curing range and establish a working exposure profile before committing to a large model.
SUNLU's technical data lists a 365-405nm curing wavelength and a liquid viscosity of 200-600mPa.s at 25°C. Exposure, supports, orientation and post-curing should be adjusted to the printer and model. A test print is a useful first step when changing colour, layer height or equipment. The mechanical figures below are typical laboratory reference data, not guaranteed specifications for every printed geometry, direction or curing setup.
Specifications
| Brand | SUNLU |
|---|---|
| Formulation | Water-Wash Standard Resin, rigid photopolymer |
| Colour | Grey / Light Gray |
| Net resin weight | 1kg |
| Curing wavelength | 365-405nm |
| Viscosity at 25°C | 200-600mPa.s |
| Tensile strength | 25MPa, typical Z-direction laboratory value |
| Elongation at break | 10%, typical |
| Flexural strength / modulus | 35MPa / 985MPa, typical |
| Notched Izod impact strength | 40J/m at 23°C, typical |
| Shore hardness | 80D, typical |
| Heat distortion temperature | 50°C at 0.45MPa, typical |
| Package contents | 1 x 1kg bottle of Grey resin |
Washing, curing and safe handling
Remove residual liquid resin with water in a dedicated container, allow the cleaned print to dry, and complete UV post-curing before handling the finished model. Water-washable does not mean water-safe, non-toxic or suitable for bare-skin contact. Collect resin-contaminated wash water and cleaning waste; do not pour it into a sink, drain or the environment. Dispose of it under applicable local rules.
Wear suitable chemical-resistant gloves, eye protection and protective clothing, and work with adequate ventilation. Avoid breathing vapour and keep liquid resin away from skin and eyes, children, food and drink. Keep the bottle upright, tightly closed and protected from sunlight in a cool, ventilated storage area. Consult the product safety data sheet before use. If a model needs food-contact, medical, prolonged skin-contact or load-bearing certification, do not assume this general-purpose resin provides it.
Gallery models, other colours, printers, tools and mechanisms illustrate the resin family and possible applications only. They are not included; the supplied item is the Grey resin bottle described above.