
SUNLU Twinkling Blue PLA 1kg Filament
SUNLU Twinkling Blue is a decorative PLA filament for FDM 3D printing. Its blue surface has a fine sparkle that gives printed objects a different appearance from ordinary solid-color PLA. This listing supplies one 1kg spool of nominal 1.75mm filament, ready for a compatible printer and spool-feeding setup.
Use it for display models, ornaments, figurines and creative prototypes where a textured visual effect is part of the design. The twinkling appearance is easiest to judge on a printed surface under changing light. Curves and raised details can reflect light differently from flat areas. Screen color, lighting, layer height and print orientation all affect the final result, so make a small sample before committing to a large display piece.
Printing Guidance
SUNLU specifies a printing temperature of 205-215°C and a speed range of 50-100mm/s for this Twinkling PLA. Its platform guidance allows an unheated bed on a suitable surface, or a heated bed at 50-65°C depending on the platform. Use the supplied spool instructions as the first reference, then tune temperature, first-layer settings and cooling for your printer and model.
The filament has a published diameter tolerance of ±0.02mm and an approximate length of 330 metres per 1kg roll. Check that your machine accepts 1.75mm filament and that the spool can turn freely. A clean build surface and a short calibration print help you assess bed adhesion and the surface effect before a longer job. Do not treat decorative PLA as a substitute for an engineering material with a tested heat or load rating.
Care Between Prints
Store the spool sealed and dry when it is not in use, protected from dust and strong heat. Secure the loose end whenever you unload filament so it cannot slip under another winding. Follow the printer and material instructions for drying if moisture affects extrusion; do not assume that every heated appliance is suitable for filament care.
Official SUNLU photographs show the blue spool, material features and example prints. Printed models and display props are not included in the package. Their purpose is to show possible uses and the material's appearance. This is a single-color Twinkling Blue spool, not a multi-spool bundle or a glow-in-the-dark material. Keep a record of settings that work well for your own machine.
Specifications
| Brand | SUNLU |
| Material | Twinkling PLA |
| Color | Twinkling Blue |
| Filament diameter | 1.75mm |
| Diameter tolerance | ±0.02mm |
| Net filament weight | 1kg |
| Approximate filament length | 330m |
| Recommended nozzle temperature | 205-215°C |
| Recommended printing speed | 50-100mm/s |
| Bed guidance | Unheated suitable platform or 50-65°C, depending on surface |
| Printer type | Compatible 1.75mm FDM / FFF printers |
| Package contents | 1 x SUNLU Twinkling Blue PLA 1kg spool |