
SUNLU Plant-Based UV 3D Printer Resin in Grey is a 1kg bottle of liquid photopolymer resin for compatible resin printers. It is intended for models, display pieces and other detailed prints where a grey finish suits the design. This is resin, not filament. The bottle supplies material for printing; the models, tools and printers in the photographs are examples only and are not included.
A plant-based resin option
SUNLU describes this family as a plant-based formulation with good moulding behaviour, low shrinkage and a balance of tensile, bending and toughness properties. It is an alternative within the manufacturer's UV resin range, rather than a substitute for every specialised engineering resin. Choose a material that matches the requirements of the finished part, especially if it will be exposed to heat, repeated loads or chemicals.
The grey colour works well for figurines, decorative pieces and design mock-ups. Flow and exposure settings still matter: even a detailed model file will need suitable orientation, supports and printer calibration. Make a small test print before committing a large amount of resin. The grey bottle and other colours in the family photos illustrate this resin range, not the colour supplied. The supplied bottle is Grey.
Before and after printing
The bottle is labelled for 405 nm UV curing. Check that your printer supports this resin type and wavelength, then use the current bottle instructions to set up the print. Exposure time is machine-dependent, so avoid treating a single setting as correct for every printer, light source, layer height or colour. Keep the resin away from unintended UV exposure while preparing the vat.
The manufacturer's feature images identify alcohol cleaning. This product is not sold as a water-washable resin. Follow the current washing and post-curing instructions for the bottle and your equipment. Clean and cure the model before handling it as a finished print, and collect contaminated cleaning liquid for proper disposal. Do not pour uncured resin or contaminated wash liquid into a sink or drain.
Handling and storage
Plant-based and low-odour wording does not mean that uncured resin is harmless, edible or suitable for food contact. Wear suitable protective gloves and eye protection, work with good ventilation and avoid skin contact, inhalation and splashes. Keep resin away from children, food and drinking areas. SUNLU's storage guidance is 10-30°C in a dry, well-ventilated place, protected from sunlight and strong light. Keep the bottle closed when not in use and follow the current safety instructions for spills, first aid and disposal.
Specifications
| Brand | SUNLU |
| Resin family | Plant-Based UV photopolymer resin |
| Colour supplied | Grey |
| Net resin weight | 1kg |
| Labelled curing wavelength | 405 nm |
| Material form | Liquid resin |
| Cleaning type | Alcohol cleaning; not sold as water-washable |
| Manufacturer storage guidance | 10-30°C; dry, ventilated and protected from light |
| Package contents | 1 × 1kg bottle of Grey SUNLU Plant-Based Resin |
Use the current label and manufacturer instructions for printer settings and processing. No medical, food-contact, biodegradability or castability certification is implied by this listing.