
SUNLU PLA Galaxy Starlit Flow 1kg Filament
SUNLU PLA Galaxy Starlit Flow is a decorative PLA filament with a dark, shimmering appearance. Fine pearlescent particles create highlights that change with the viewing angle and light. The material is supplied as one 1kg spool of nominal 1.75mm filament for compatible FDM or FFF 3D printers.
Starlit Flow is a good choice for display objects where shape and lighting are part of the design. Masks, sculptures, ornaments and presentation models can show different reflections across curved surfaces. The appearance is an optical surface effect rather than a light source. It should not be confused with glow-in-the-dark filament, and it does not require a separate multicolor feeding system to reveal the material's finish.
Plan the Print Around the Surface
Use a small test piece to see how layer height, wall direction and lighting affect your result. SUNLU recommends a nozzle size of at least 0.4mm for this material. Its published printing guidance gives a nozzle temperature of 200-230°C and speeds of 50-250mm/s. These are starting ranges, not a promise that every printer will produce the same result at the highest speed. Begin with the instructions supplied with the spool, then adjust for your machine and model.
For the build surface, SUNLU lists 50-60°C for a heated bed, with adhesive suggested when printing on an unheated surface. Choose a surface and release method that suit your printer. Confirm the first layer before leaving a long print to run. The fine pearlescent effect can make details stand out, but it cannot compensate for an untuned printer, poor support placement or unsuitable model geometry.
Storage and Handling
Keep the filament sealed and dry between jobs, away from dust and excessive heat. Secure the free end before removing the spool so it does not pass underneath another turn. Check that your spool holder can rotate freely and that the filament path has no sharp bends. Follow the supplied spool instructions if using removable spool features.
This listing supplies one Starlit Flow spool only. The gallery contains official SUNLU product photographs, shared Galaxy-family feature images and application examples. Other colors, printed objects and props shown are not included. The filament remains a PLA-based plastic: a decorative finish does not establish suitability for high-temperature use, heavy loads or safety-critical parts. Test functional prints against the needs of your project.
Specifications
| Brand | SUNLU |
| Material | PLA Galaxy |
| Color | Starlit Flow |
| Surface effect | Pearlescent sparkle with angle-dependent color highlights |
| Filament diameter | 1.75mm |
| Net filament weight | 1kg |
| Approximate filament length | 330m |
| Recommended nozzle size | At least 0.4mm |
| Recommended nozzle temperature | 200-230°C |
| Published speed range | 50-250mm/s; tune for printer |
| Heated-bed guidance | 50-60°C; suitable adhesive for unheated surface |
| Package contents | 1 x SUNLU PLA Galaxy Starlit Flow 1kg spool |