
SUNLU PLA-CF Black Filament for Rigid Matte Prints
SUNLU PLA-CF combines a PLA base with carbon-fiber reinforcement to produce rigid parts with a dark matte surface. This black version is supplied as a 1kg spool of 1.75mm filament. It is a practical material to consider for visual prototypes, brackets, fixtures and detailed models when you want a less glossy finish and more stiffness than ordinary decorative PLA.
The fine matte texture can make visible layer lines less noticeable, giving prints a clean appearance without paint. SUNLU describes this range as carbon-fiber-reinforced PLA, rather than nylon or PETG. That distinction matters when choosing a material: reinforcement does not make every PLA-based part suitable for hot environments. Check the temperature, loading and impact requirements of your project before using any printed component in service.
Start with the Right Printer Setup
The filament has a nominal diameter of 1.75mm with a stated tolerance of ±0.02mm. Use it with an FDM or FFF printer set up for this diameter and filled materials. Carbon fiber is abrasive, so SUNLU's printing guidance recommends a hardened nozzle. Check your printer and nozzle manufacturer's requirements rather than assuming a standard brass nozzle is suitable for repeated use.
For initial setup, SUNLU lists 215-225°C at 50-100mm/s, rising to 225-245°C at 100-200mm/s. A heated bed at 50-60°C is the published starting range. Tune those settings to your printer, build surface and part geometry. Print a small calibration model before committing to a long job, and inspect extrusion, layer bonding and surface detail.
Storage and Everyday Handling
SUNLU supplies this filament with protective vacuum packaging and desiccant. Store unused material sealed and dry, and secure the free end before removing the spool from your printer. Controlled winding helps orderly feeding, but a loose strand can still slip beneath another turn during handling. Follow your printer's loading and unloading process to avoid unnecessary strain on the feed path.
The gallery includes SUNLU spool images and application examples. Printed parts shown beside the spool or in feature images are examples, not supplied components. This listing includes one black PLA-CF filament spool for your own printing projects.
Specifications
| Brand | SUNLU |
|---|---|
| Material | PLA-CF (carbon-fiber-reinforced PLA) |
| Color | Black |
| Filament diameter | 1.75mm |
| Diameter tolerance | ±0.02mm |
| Net filament weight | 1kg |
| Recommended nozzle temperature | 215-225°C at 50-100mm/s; 225-245°C at 100-200mm/s |
| Recommended heated bed | 50-60°C |
| Nozzle guidance | Hardened, abrasion-resistant nozzle recommended |
| Package contents | 1 x SUNLU PLA-CF Black 1kg spool |