
SUNLU PLA+ 3D Printer Filament - Transparent, 1.75mm, 1kg
SUNLU PLA+ (PLA Plus) is the toughened everyday PLA that made SUNLU a favourite with print farms and hobbyists: it prints as easily as regular PLA but comes out noticeably stronger, with impact strength up to 8 kJ/m² - roughly 2-3 times that of ordinary PLA on the market. This 1kg spool of crystal-clear transparent 1.75mm filament is a dependable daily-driver material for homes, schools, studios and workshops across India.
Every spool is produced with laser-monitored diameter control and held to a tight 1.75 ± 0.02 mm tolerance, keeping extrusion smooth and consistent through long prints. SUNLU's fully automated winding lays the filament 100% neatly on the spool - no knots, no tangles, no mid-print failures. It is clog, bubble, tangle, warping and stringing resistant, and runs on virtually any 1.75mm FDM printer - Bambu Lab, Creality, Anycubic, Prusa, Elegoo and more - with no special tuning.
Key Features
- 2-3x tougher than ordinary PLA: impact strength up to 8 kJ/m² for parts that survive daily use.
- 100% neatly wound: SUNLU's automated spooling prevents knots and tangles that ruin prints.
- Precise 1.75 ± 0.02 mm diameter: laser-monitored consistency for even extrusion and clean layers.
- Easy to print: low warping, great layer adhesion, no enclosure needed.
- Reusable 3rd-generation spool: multi-hole design dries thoroughly and works with spool refills.
- Wide compatibility: works with 99% of 1.75mm FDM 3D printers, including AMS and AMS Lite systems.
Technical Specifications
| Material | PLA+ / PLA Plus (toughened PLA) |
|---|---|
| Colour | Transparent |
| Diameter | 1.75mm (± 0.02mm tolerance) |
| Net weight | 1kg spool |
| Nozzle temperature | 195-205°C (50-100mm/s), 205-220°C (100-300mm/s) |
| Print speed | 50-100mm/s standard, up to 300mm/s with higher temperature |
| Impact strength | up to 8 kJ/m² (2-3x ordinary PLA) |
| Spool dimensions | 8.00" diameter, 2.50" width, 2.20" hub hole |
What is it good for?
Prototypes, figurines and miniatures, cosplay props, drone and RC parts, robotics brackets, planters, household repairs, school projects and decorative models. The crystal-clear transparent finish gives prints a clean, solid colour straight off the bed.
In the box
- 1 x SUNLU PLA+ filament spool, Transparent, 1.75mm, 1kg net weight
Good to know
- PLA+ absorbs moisture over time. If you hear popping or see stringing, dry the spool at 50-55°C for 4-6 hours.
- Store sealed with desiccant when not in use.
- For faster printing above 100mm/s, raise the nozzle temperature into the 205-220°C range.