
SUNLU PA (Nylon)-Like UV 3D Printer Resin in Black is a 1kg bottle of photopolymer resin for detailed models that need a balance of stiffness and flexibility. It is a liquid resin for compatible UV resin printers, not nylon filament and not a water-washable formulation. The nylon-like name describes the intended behaviour of the cured material; it does not mean the bottle contains conventional PA filament.
Detail with a tougher feel
The PA-like formulation is intended for models, custom parts, figurines and functional prototypes where brittle detail would be a drawback. SUNLU describes a matte finish, bending resistance and support for drilling and tapping after processing. These qualities can help when making fit-check models, small housings or demonstration parts. Printed examples in the gallery show possible applications only. Models, tools, printers and other equipment are not included with the bottle.
SUNLU's current technical data lists typical Z-direction tensile strength of 35 MPa, elongation at break of 48%, flexural strength of 42 MPa and notched Izod impact strength of 108 J/m at 23°C. These are laboratory reference values, not guaranteed results for every printer or design. Orientation, geometry, exposure, washing and post-curing can change the finished part. Test a prototype before depending on its performance, and do not assume suitability for a safety-critical or sustained-load application.
Set up, clean and cure
The manufacturer's curing wavelength range is 365-405 nm. Confirm your printer's resin requirements before use and run an exposure test for its light source. A 0.05 mm layer height and 25-30°C printing environment are manufacturer starting recommendations, not a universal profile. Shake the sealed bottle thoroughly, allow bubbles to settle and protect the vat from stray UV light. Inspect supports and part orientation as carefully as exposure settings.
Clean printed parts using ethanol or isopropyl alcohol of at least 95% concentration, following the resin and wash-equipment instructions. The technical guide suggests 5-6 minutes of cleaning and 3-5 minutes of UV post-curing as reference timings. Let the part dry before curing, and adjust processing for the model. This resin should not be treated as water-washable. Keep cleaning liquids containing resin out of drains.
Handling and storage
Uncured resin is a chemical product, even if its odour seems mild. Wear suitable protective gloves and eye protection, work with good ventilation and avoid skin contact, inhalation and splashes. Keep it away from children, food and drinking areas. Store the bottle sealed, upright and protected from sunlight and heat, and follow the label and safety data sheet for spills, first aid and local waste disposal.
Specifications
| Brand | SUNLU |
| Resin family | PA / Nylon-Like photopolymer resin |
| Colour | Black |
| Net resin weight | 1kg |
| Curing wavelength | 365-405 nm |
| Typical viscosity | 400 ± 50 mPa·s at 25°C |
| Typical tensile strength (Z) | 35 MPa |
| Typical elongation at break (Z) | 48% |
| Typical flexural strength (Z) | 42 MPa |
| Typical flexural modulus (Z) | 1053 MPa |
| Typical notched Izod impact (Z) | 108 J/m at 23°C |
| Typical hardness | Shore D 80 |
| Typical heat distortion temperature (Z) | 50°C at 0.45 MPa |
| Cleaning | ≥95% ethanol or isopropyl alcohol |
| Package contents | 1 × 1kg bottle of Black SUNLU PA / Nylon-Like resin |
Mechanical and thermal figures are typical manufacturer laboratory data for reference, not a performance guarantee. Check the bottle label and current technical and safety instructions before printing.