
SUNLU Matte PLA Dual-Color Filament - Black / Red, 1.75mm, 1kg
Bring two shades into one print with SUNLU Matte PLA Dual-Color in Black / Red. This 1kg spool combines two colors within a single strand, producing a changing appearance across the surfaces of a model. Turn the finished piece and different tones come forward. The soft matte surface keeps reflections low, making this filament a useful choice for display models, decorative objects, figurines, gifts and personalized accessories.
The effect comes from the filament itself, rather than a multicolor toolhead or a painted finish. Model geometry, surface direction, viewing angle and lighting all affect the visible color balance. Curved surfaces and textured shapes can make that change especially noticeable. For a planned result, print a small test in the intended orientation before committing to a larger decorative piece.
SUNLU specifies a 1.75mm diameter with a tolerance of +/-0.02mm. The matte formulation helps soften the appearance of layer lines while retaining the detail of the printed design. It is intended for FDM printers using 1.75mm filament. Check your printer's filament path, spool clearance and available temperature settings before loading the spool.
Choose the nozzle temperature to suit the speed. SUNLU recommends 205-215C for 50-100mm/s printing, rising to 215-245C for 100-230mm/s. A heated bed at 50-60C is the suggested starting point. On an unheated bed, the manufacturer recommends glue for first-layer adhesion. These are starting ranges, so tune the temperature and first layer for your printer and build surface.
Specifications
| Brand | SUNLU |
| Material | Matte PLA Dual-Color |
| Color pair | Black / Red |
| Filament diameter | 1.75mm |
| Diameter tolerance | +/-0.02mm |
| Net weight | 1kg spool |
| Surface | Matte, low-reflection |
| Nozzle, 50-100mm/s | 205-215C |
| Nozzle, 100-230mm/s | 215-245C |
| Heated bed | 50-60C |
| Printer type | FDM, 1.75mm filament |
Printing Tips
- Start with a small orientation test to see how the two shades fall across your model.
- Keep the first layer even and choose an adhesion method suitable for your build plate.
- Store unused filament in a sealed bag with desiccant and keep the spool path free of snags.