
SUNLU 14K Red Wax UV 3D Printer Resin is a 1kg bottle of rigid photopolymer resin for finely detailed models with a matte, red-wax-like appearance. It suits decorative pieces, head sculpts, figurines and display models where small surface details are part of the design. This listing supplies one bottle of resin. Printed models, printers, tools and other equipment shown in the photographs are application examples and are not included.
A matte finish for detailed models
The red-wax colour makes surface textures, folds and sculpted features easy to see. SUNLU describes the formulation as a high-precision resin with a matte finish and good flow. The 14K name identifies the resin range; the detail you achieve still depends on the printer, model, layer settings, supports and exposure calibration. Using this resin does not change a printer's hardware resolution.
Red Wax describes the appearance of the printed material. Do not assume that it is a castable wax, a dental resin or a validated material for burnout casting. Check the requirements of any specialised process separately. For ordinary display work, the rigid formulation offers a different feel from flexible, nylon-like or water-washable resin families.
Printing, washing and curing
The manufacturer's technical guide lists a curing wavelength of 365-405 nm. Confirm compatibility with your resin printer and make a small exposure test before starting a large model. SUNLU suggests a printing environment of 25-30°C and relative humidity below 60%. Printer settings are starting points rather than universal values, so adjust them for your machine, layer thickness and model geometry.
Use clean ethanol or isopropyl alcohol at a concentration of at least 95% for washing, following the resin and washing-equipment instructions. The technical guide suggests 5-6 minutes of cleaning and 3-5 minutes of post-curing in a curing chamber. Allow the model to dry and follow the equipment's safety instructions. This is not a water-washable resin, and resin-contaminated liquid must not be poured into drains.
Handling and storage
Low odour does not mean uncured resin is harmless. Wear suitable protective gloves and eye protection, work with good ventilation and avoid skin contact, inhalation and splashes. Keep the bottle away from children, food and drinking areas. Store it sealed and protected from light at 15-35°C, with relative humidity below 60%, as stated in SUNLU's technical guide. Follow the current safety data sheet for spill response, first aid and local waste disposal.
Specifications
| Brand | SUNLU |
| Resin range | 14K Red Wax rigid photopolymer resin |
| Colour / finish | Red Wax / matte |
| Net resin weight | 1kg |
| Curing wavelength | 365-405 nm |
| Typical viscosity at 25°C | 300-600 mPa·s |
| Typical tensile strength (Z) | 40 MPa |
| Typical elongation at break (Z) | 15% |
| Typical flexural strength (Z) | 45 MPa |
| Typical flexural modulus (Z) | 1909 MPa |
| Typical notched Izod impact at 23°C (Z) | 30 J/m |
| Typical hardness | Shore D 84 |
| Typical heat distortion temperature (Z) | 53°C at 0.45 MPa |
| Cleaning | ≥95% ethanol or isopropyl alcohol |
| Package contents | 1 × 1kg bottle of SUNLU 14K Red Wax Resin |
Mechanical and thermal figures are typical manufacturer laboratory values for reference, not guaranteed results for every print. Check the bottle label and current technical and safety instructions before use.