
SUNLU 14K ABS-Like Resin - Grey, 1kg
SUNLU 14K ABS-Like Resin in Grey is a UV-curing photopolymer for detailed models that need a balance of definition and toughness. This listing supplies one 1kg bottle of the Grey version. It is a liquid printing resin, not ABS filament, and belongs to SUNLU's 14K ABS-Like range rather than its Standard, Standard Plus or ordinary ABS-Like resin families.
The formulation is designed to reproduce fine edges with a matte surface. That combination makes it a useful option for miniatures, display figures, ornaments and concept models where small surface details should remain visible. Grey gives you a neutral starting colour for inspecting a model or preparing it for further finishing. The 14K product name does not upgrade a printer's resolution: the final result still depends on the machine, model, supports, exposure and post-processing.
Detail with measured toughness
SUNLU's technical sheet reports typical tensile strength of 28 MPa, elongation at break of 25% and flexural strength of 35 MPa. These figures help compare materials, but they are laboratory reference values rather than a guarantee for every printed part. Toughness can be useful for models with assembled sections and intricate structures, although thin projections still require careful support removal and handling.
The resin has a stated viscosity of 300-600 mPa·s at 25°C and a curing wavelength range of 365-405nm. Check your resin printer's material guidance before use. Do a small calibration print before committing to a long build, especially when changing resin colour, layer thickness or printer settings. Avoid assuming that an exposure profile for another SUNLU resin is suitable for this one.
Technical reference
| Brand / range | SUNLU / 14K ABS-Like Resin |
|---|---|
| Colour / supplied quantity | Grey / one 1kg bottle |
| Material | UV-curing photopolymer resin |
| Curing wavelength | 365-405nm |
| Viscosity at 25°C | 300-600 mPa·s |
| Tensile strength / elongation | 28 MPa / 25% |
| Flexural strength / modulus | 35 MPa / 1046 MPa |
| Notched Izod impact strength | 82 J/m |
| Shore hardness | 80 HD |
| Heat deflection temperature | 50°C at 0.45 MPa |
| Storage | Sealed, protected from light, 15-35°C and below 60% RH |
Mechanical and thermal values are typical manufacturer test data. Printed performance varies with orientation, printer, curing and test conditions. Validate suitability for your intended use rather than treating these figures as design limits.
Preparation, cleaning and safety
Shake the closed bottle thoroughly and allow bubbles to settle before printing. Keep the resin away from direct sunlight and close the container promptly after use. SUNLU recommends cleaning prints with at least 95% ethanol or isopropyl alcohol, followed by UV post-curing. Use a compatible wash-and-cure process and avoid prolonged soaking, which can affect the part.
Low odour does not mean harmless. The safety sheet identifies ingestion, skin irritation, allergic reaction and serious eye-damage hazards, with respiratory and repeated-exposure concerns. Use suitable chemical-resistant gloves, eye protection and good ventilation. Avoid breathing vapour or spray and prevent skin contact with uncured resin. Keep it away from children, food and drink. Do not pour resin or contaminated wash liquid into drains; collect waste for disposal under local rules. Read the current label and safety data sheet before handling.