
SpeedyBee F745 35A BLS 25.5x25.5 AIO Flight Controller
The SpeedyBee F745 35A BLS AIO combines an STM32F745 flight controller and a 35A BLHeli_S 4-in-1 ESC on a single 25.5 x 25.5 mm whoop-pattern board, made for 3.5 to 5 inch cinewhoop, long-range and lightweight quads on 3S to 6S LiPo. The MPU6000 gyro and Betaflight OSD keep tuning familiar, and the onboard 2.4 GHz Wi-Fi/Bluetooth combo chip lets you configure parameters, flash firmware and download blackbox logs wirelessly from the SpeedyBee app.
A built-in 6-pin DJI Air Unit connector, 8 MB blackbox flash, BMP280 barometer and a current sensor cover the usual FPV build needs. Note the board measures 36.5 x 36.5 x 7 mm, so quads below 3.5 inch should be checked for clearance. The USB connection requires soldering the included external USB Type-C module to the D+, D- and GND pads.
Features
- All-in-one STM32F745 flight controller with 35A BLHeli_S 4-in-1 ESC, 3S-6S LiPo input
- MPU6000 gyro, Betaflight OSD, BMP280 barometer, current sensor (scale 256)
- BLE Bluetooth parameter configuration plus wireless firmware flashing and blackbox download via the SpeedyBee app
- 8 MB onboard flash for blackbox logging; built-in 6-pin DJI Air Unit connector
- 25.5 x 25.5 mm mounting with 3 mm holes; board size 36.5 x 36.5 x 7 mm, 10.1 g
- BetaFlight camera control pad; external USB Type-C module included for configuration
Package Includes
- 1 x SpeedyBee F745 35A BLS 25.5x25.5 AIO Flight Controller
- 1 x 35V 470uF capacitor
- 1 x XT30 power cable (7 cm)
- 1 x 6-pin DJI Air Unit cable
- 1 x External USB port module (5 mm wire)
- 5 x M2 x 12 mm screws