
SparkFun Triad Spectroscopy Sensor - AS7265x (Qwiic)
The SparkFun Triad Spectroscopy Sensor is a pocket-sized optical inspection device that combines three AS7265x spectral sensors - the AS72651 (master), AS72652 and AS72653 - on a single Qwiic board, creating a compact 18-channel spectrophotometer for light analysis. Whether you are analyzing plant health, identifying materials, or measuring light sources, the Triad captures a spectral fingerprint of your target across the visible to near-infrared range.
Per the AMS AS7265x datasheet, the chipset measures 18 discrete channels with center wavelengths from 410nm to 940nm, each with 20nm FWHM: the AS72653 covers 410, 435, 460, 485, 510 and 535nm; the AS72651 covers 610, 680, 730, 760, 810 and 860nm; and the AS72652 covers 560, 585, 645, 705, 900 and 940nm. Measurement precision is 28.6 nW/cm2 per count with +/-12% accuracy.
For target illumination, the board integrates three dedicated light sources, separate from the 18 detection channels: a 405nm UV LED, a 5700K white LED and an 875nm IR LED, each with software on/off and current control, plus support for an optional external bulb. Communication is selectable between standard I2C and a 115200bps serial interface with a simple AT command set. Thanks to the Qwiic Connect System, you can plug the Triad into your microcontroller without soldering, and SparkFun's Arduino library and Python package handle everything from raw data acquisition to controlling the onboard LEDs. Note: the I2C address of the AS7265x is 0x49 and is hardware defined; a multiplexer (such as the Qwiic Mux Breakout) is required to use multiple AS7265x sensors on a single bus.
Caution: the onboard 405nm illumination LED (Vishay VLMU3100) carries an eye-safety warning in the LED manufacturer's datasheet - do not look directly into the LED while it is illuminated.
Features
- Three AS7265x spectral sensors (AS72651 master, AS72652, AS72653) on one board
- 18 detection channels, 410nm to 940nm (visible to near-infrared), 20nm FWHM per channel
- 28.6 nW/cm2 per count; accuracy of +/-12%
- Integrated illumination LEDs: 405nm UV, 5700K white, 875nm IR (target light sources, separate from detection channels)
- Software control over each illumination LED, as well as current control
- Selectable interface: I2C (Qwiic) or Serial (115200bps) with AT command set
- Optional external bulb or illumination control
- Programmed with the latest firmware from AMS
- Two Qwiic connectors, no soldering required
Package Includes
- 1x SparkFun Triad Spectroscopy Sensor - AS7265x (Qwiic)
Not included: Qwiic cable and microcontroller are sold separately.