
SparkFun STTS22H Temperature Sensor (Qwiic)
The SparkFun STTS22H Temperature Sensor is a Qwiic-enabled breakout board based on the ultralow-power, high-accuracy digital temperature sensor from STMicroelectronics, housed in SparkFun's standard Qwiic form factor. Factory calibration gives the STTS22H high-end accuracy over the entire operating range, reaching ±0.5 °C between -10 °C and +60 °C with no further calibration needed at the application level.
The operating mode is user-configurable: select different output data rates down to 1 Hz or use one-shot mode for battery saving, where current consumption falls to just 1.75 µA. Four I2C addresses can be selected with the jumpers on the back of the board, and an interrupt pin signals the application whenever a user-selectable high or low temperature threshold is exceeded. Hook-up uses the solderless Qwiic Connect System, and the board carries built-in 2.2 kΩ I2C pullup resistors that can be disabled when multiple devices share the bus.
Features
- STMicroelectronics STTS22H ultralow-power digital temperature sensor, factory calibrated, NIST traceable
- I2C interface (Qwiic-enabled), four selectable addresses: 0x3C (default), 0x3E, 0x38, 0x3F
- Operating temperature range: -40 °C to +125 °C
- Temperature accuracy (max): ±0.5 °C from -10 °C to +60 °C
- Operating voltage: 1.5 V to 3.6 V (typically 3.3 V over the Qwiic cable)
- Ultralow current: 1.75 µA in one-shot mode
- Programmable operating modes: freerun, one-shot and low-ODR (down to 1 Hz)
- Programmable high/low temperature thresholds with interrupt pin
- 2 x Qwiic connectors; standard SparkFun Qwiic 1 in x 1 in form factor
- Arduino library available
Package Includes
- 1 x SparkFun STTS22H Temperature Sensor (Qwiic)
Qwiic cable, headers and microcontroller are not included.