
SparkFun Qwiic dToF Imager - TMF8820
The SparkFun Qwiic dToF Imager puts AMS TMF8820 direct time-of-flight sensing on a standard 1-inch by 1-inch Qwiic breakout, measuring distances from 10mm out to 5000mm (16.4ft) at up to 30 readings per second. The sensor does the hard work on-chip: a single-photon avalanche photodiode (SPAD) array, a fast time-to-digital converter and histogram processing deliver accurate distances with confidence values over a plain I2C bus, even in bright sunlight thanks to an on-chip sunlight-rejection filter and algorithm.
A multi-lens array above the Class 1 940nm VCSEL widens the field of illumination, and the receiver lens supports a dynamically adjustable field of view up to 63 degrees diagonally. Output is 3x3 multizone, so the board can track several objects in different zones at once - handy for collision avoidance on robots and drones, presence detection, laser autofocus and light-curtain applications.
Two Qwiic connectors allow solderless daisy-chaining, while 0.1-inch pads break out power, I2C, interrupt, two configurable GPIO pins and an enable pin for traditional prototyping. The power LED and I2C pull-ups can be disabled with solder jumpers, and the board draws 57mA active and only 8uA in standby. It is also fully compatible with SparkFun's DataLogger IoT system, which detects and logs the sensor with no programming at all. Note: driving the TMF8820 needs a microcontroller with generous flash - ATmega328P boards such as the classic Uno are not suitable; an Artemis or ESP32-class board is recommended.
Features
- AMS TMF8820 multizone direct time-of-flight sensor
- Measures 10mm to 5000mm at up to 30Hz
- 3x3 configurable multizone output with multi-object detection
- SPAD array, TDC architecture and on-chip histogram processing
- Class 1 940nm VCSEL light source, field of view adjustable up to 63° diagonally
- I2C interface (address 0x41), 2.7V to 3.6V operation (3.3V via Qwiic cable)
- 2x Qwiic connectors plus 0.1-inch breakout pads (GND, 3V3, SDA, SCL, INT, GP0, GP1, EN)
- 57mA active, 8uA standby; LED and I2C pull-up solder jumpers
- Operating temperature -30°C to +70°C
Package Includes
- 1 x SparkFun Qwiic dToF Imager - TMF8820 (SEN-19036)