
SparkFun OpenLog Artemis (without IMU)
The OpenLog Artemis (OLA) from SparkFun is an open-source data logger that ships preprogrammed, so it can record data to a microSD card as plain CSV files without any coding. Connect a compatible Qwiic sensor and the board detects, configures and starts logging it automatically - no soldering, drivers or firmware work needed.
This version of the board comes without the internal ICM-20948 IMU. Apart from the missing motion sensor it is functionally identical to the standard OpenLog Artemis, and suits projects that rely on external sensors rather than onboard motion data.
An onboard real-time clock (with battery backup) time-stamps every reading, and four 14-bit ADC channels on the board edge can log voltages up to 2V at rates up to 1900Hz on one channel (1000Hz across all four). Configuration happens over a simple serial menu: plug in a USB-C cable, open a terminal at 115200bps and press any key. Logged data is streamed to the terminal and the microSD card at the same time.
Features
- Artemis module (Cortex-M4F based Apollo3 microcontroller)
- Automatic detection, configuration and logging of compatible Qwiic sensors
- Serial logging at baud rates up to 500000bps
- Four analog-to-digital channels: 14-bit, up to 1900Hz, 2V max (3.3V compatible)
- microSD socket with support for FAT32 and FAT16 cards up to 32GB, with power control
- Real-time clock with 1mAh battery backup for time-stamped logging
- USB-C configuration and programming via CH340E and the Artemis Firmware Upload GUI
- Built-in MCP73831 single-cell LiPo charger (minimum 450mA charge rate)
- Supply options: 3.3V to 6.5V via VIN, 5V via USB-C, or 3.6V to 4.2V from a LiPo battery
- Low power draw: about 20mA running, 80uA sleeping and 18uA in deep sleep with the regulator shut down
- Ports: 1x USB-C, 1x LiPo battery (2-pin JST), 1x Qwiic I2C with power control, 1x SWD 2x5 header
- Indicator LEDs for power, LiPo charge, serial Tx/Rx and status
Package Includes
- 1x SparkFun OpenLog Artemis (without IMU)
Not included: microSD card, USB-C cable, LiPo battery, Qwiic cables and sensors are sold separately.