
SparkFun GPS-28137 GNSS Flex pHAT for Raspberry Pi
The SparkFun GNSS Flex pHAT (GPS-28137) is a solder-free carrier board for modular SparkPNT GNSS Flex modules, enabling easy high-precision GNSS integration with single-board computers. It is the heart of the SparkPNT Flex ecosystem, providing a plug-and-play bridge between a GNSS Flex module and a Raspberry Pi, NVIDIA Jetson Orin Nano, Google Coral or other compatible single-board computer. Simply stack the pHAT on the 40-pin header, attach a GNSS Flex module to the two 2x10-pin Flex headers, and the navigation system is ready to configure.
Please note that this is a carrier board only and does not include a GNSS module. This modular approach lets the perfect receiver engine be selected for each application, from meter-level positioning in urban environments to all-band RTK with heading for autonomous navigation, using any SparkPNT GNSS Flex module.
Features
- Solder-free carrier board for SparkPNT GNSS Flex modules; pre-soldered 40-pin header stacks directly onto a Raspberry Pi, NVIDIA Jetson Orin Nano, Google Coral or compatible single-board computer.
- Modular Flex headers: two standardized 2x10-pin male headers for attaching, swapping or upgrading a GNSS Flex module at any time.
- Full interface access: breaks out all potential interfaces from the attached module, including up to four UARTs, I2C, USB and critical timing signals (PPS and event).
- USB-C interface for direct communication with the GNSS Flex module from a computer.
- SMA antenna connector bridged to a U.FL connector; jumper the U.FL connectors on the module and pHAT with a short U.FL cable for a sturdy external-antenna connection.
- Qwiic connectors for the I2C bus of the attached module.
- Communicates by default over the Raspberry Pi primary serial bus (TX: GPIO14/Pin 8, RX: GPIO15/Pin 9); other interfaces can be used instead.
- Board dimensions 65.0 mm x 56.5 mm with four mounting holes.
Package Includes
- 1 x SparkFun GPS-28137 GNSS Flex pHAT for Raspberry Pi
No GNSS Flex module, Raspberry Pi or other single-board computer, GNSS antenna, U.FL cable or Raspberry Pi HAT hardware is included. Any coin shown in photographs is a size reference only, not package contents.