
SparkFun GPS-26620 GNSS RTK Breakout - Quad-Band LG290P (Qwiic)
The SparkFun Quadband GNSS RTK Breakout - LG290P (Qwiic) is a high-precision positioning board built around the Quectel LG290P GNSS module. Its dimensions, pin layout and connectors are exactly the same as the popular SparkFun GPS-RTK-SMA Breakout - ZED-F9P (Qwiic), so it works as a drop-in upgrade in existing designs while adding quad-band reception.
The LG290P is a quad-band, multi-constellation, high-precision RTK GNSS receiver. It simultaneously receives the L1, L2, L5 and L6/E6 frequency bands of the GPS, GLONASS, Galileo, BeiDou, QZSS and NavIC constellations, and supports SBAS augmentation systems (WAAS, EGNOS, BDSBAS, MSAS, GAGAN and SDCM) together with RTCM and RTK corrections for precision navigation with fast convergence. A built-in NIC anti-jamming unit provides interference signal detection and elimination, improving reception in difficult electromagnetic environments, urban areas and under tree cover.
Three UART ports are broken out to the USB-C connector (through a CH342 USB-to-serial converter), a 4-pin locking JST connector and a BlueSMiRF 6-pin header, and 24 PTH pins around the board edge give access to the remaining signals. An SMA connector on the board edge takes the GNSS antenna, and SMD pads allow a second (RP-)SMA connector for a PPS output. Two 4-pin Qwiic connectors are provided for future use when the module's I2C feature becomes available. With its high precision and low power consumption, the board suits intelligent robots, UAVs, precision agriculture, mining, surveying and autonomous navigation.
Note: Currently only the UART interface is supported by the module firmware. Support for some PPP services (BDS PPP-B2b, QZSS CLAS, MADOCA-PPP and Galileo HAS) is still under development.
Features
- Quectel LG290P quad-band multi-constellation RTK GNSS receiver.
- Simultaneous reception of L1, L2, L5 and L6/E6 bands across GPS, GLONASS, Galileo, BeiDou, QZSS and NavIC.
- SBAS support: WAAS, EGNOS, BDSBAS, MSAS, GAGAN and SDCM; RTCM and RTK corrections for precision navigation.
- Built-in NIC anti-jamming unit with interference detection and elimination.
- Three UART ports: USB-C (CH342 dual USB-serial converter, single channel used), 4-pin locking JST and BlueSMiRF 6-pin header; 24 PTH pins broken out.
- SMA antenna connector plus SMD pads for a second (RP-)SMA connector for PPS output.
- Two 4-pin Qwiic connectors, reserved for future I2C support.
- Input voltage 3.0 V to 5.5 V; RT9080 LDO supplies up to 600 mA; module current 91 mA in acquisition and tracking.
- Backup battery support and status LEDs; configuration jumpers.
- Board dimensions 43.2 mm x 43.2 mm (1.70 in x 1.70 in) with four 4-40 mounting holes; same footprint as the SparkFun ZED-F9P RTK-SMA breakout.
Package Includes
- 1 x SparkFun GPS-26620 GNSS RTK Breakout - Quad-Band LG290P (Qwiic)
No GNSS antenna, SMA cable, USB-C cable, pin headers or host controller is included. Any coin shown in photographs is a size reference only, not package contents.