
SparkFun GPS-24114 GNSS L1/L5 Breakout - NEO-F10N (SMA)
The SparkFun GNSS L1/L5 Breakout is a standard-precision GNSS board built around the u-blox NEO-F10N module, delivering meter-level positional accuracy. The NEO-F10N receives the L1/L5 bands instead of the more common L1/L2 pairing. The L5 signals sit inside the protected ARNS (aeronautical radio navigation service) frequency band, so they face less RF interference, and u-blox F10 dual-band multipath mitigation lets the module pick the best signals from both bands for noticeably better accuracy in difficult urban environments than L1 alone.
The board supports concurrent reception of three constellations: GPS, Galileo and BeiDou. The NEO-F10N has a single serial UART port, so SparkFun added a CH340C USB-to-serial converter for a direct USB-C connection to a computer. If you wire the UART pins to a microcontroller or radio, cut the USB-TX and USB-RX jumpers to avoid bus contention. Power, serial, pulse-per-second and control pins are broken out to 0.1-inch spaced pins, and a 1x6 header is provided for a BlueSMiRF v2 to send data wirelessly. An onboard rechargeable backup battery powers the module RTC, cutting time-to-first-fix from about 28 s cold to 2 s hot, and the integrated SMA connector gives a secure antenna connection.
Features
- Concurrent reception of GPS, Galileo and BeiDou; receives L1/L5 bands.
- Positional accuracy 1.5 m (GPS); time pulse accuracy 30 ns.
- Time to first fix: 28 s cold, 2 s hot with backup battery.
- Max navigation rate 20 Hz (single-GNSS configuration, GPS).
- Voltage 5 V or 3.3 V supply, all logic 3.3 V; current 21 mA to 26 mA depending on constellations and tracking state; AP2112K 3.3 V/600 mA regulator.
- Operational limits: max 4 G, max altitude 80 km, max velocity 500 m/s.
- USB-C connector with ESD protection and CH340C USB-to-serial converter; integrated SMA antenna connector.
- Software-configurable baud rate (38400 default), odometer, spoof detection, external interrupt and pin control; supports NMEA and UBX over UART.
- Power and PPS LEDs; jumpers for SHLD, USB-5V, MEAS, USB-TX, USB-RX, EXT-3V3, PWR LED and PPS LED.
- Board dimensions 50.8 mm x 38.1 mm (not including SMA connector); weight 9.75 g.
Package Includes
- 1 x SparkFun GPS-24114 GNSS L1/L5 Breakout - NEO-F10N (SMA)
No GNSS antenna, SMA cable, USB-C cable, pin headers or host controller is included. The coin in the scale photograph is a size reference, not package contents.