
SparkFun GPS-16481 GPS-RTK-SMA Breakout - ZED-F9P (Qwiic)
The SparkFun GPS-RTK-SMA Breakout is a high-precision GNSS board built around the u-blox ZED-F9P module. Standard GPS gets you within a few meters; this board uses Real-Time Kinematics (RTK) to reach 10 mm three-dimensional accuracy, letting you pinpoint an object's X, Y and Z position to roughly the width of a fingernail. This version fits a robust, panel-mountable SMA connector for a secure connection to your L1/L2 GNSS antenna.
The ZED-F9P works as a rover receiving correction data or as a base station broadcasting it. Its survey-in mode lets it become a base station and produce RTCM 3.x correction data, giving you a complete professional-grade RTK solution. Concurrent reception of GPS, GLONASS, Galileo and BeiDou on the L1C/A and L2C bands keeps a fix available in difficult conditions.
Connection and Setup
Five communication ports are active at the same time: USB-C (enumerates as a COM port), UART1 (3.3 V TTL), UART2 for RTCM correction reception (3.3 V TTL), I2C through the two Qwiic connectors or the broken-out pins, and SPI. The Qwiic connectors need no soldering, and 0.1-inch spaced pins suit a breadboard or perfboard. An onboard rechargeable backup battery keeps the module configuration and satellite data for up to two weeks, giving a fast warm start. You can set a variable I2C address, use geofencing and raise the high-precision RTK navigation rate to 20 Hz. The SparkFun u-blox GNSS Arduino library reads latitude, longitude, heading and speed over the lightweight binary interface instead of processor-heavy NMEA parsing, and the board works with SparkFun DataLogger for automatic detection, configuration and logging without coding or soldering.
Features
- Concurrent reception of GPS, GLONASS, Galileo and BeiDou; receives both L1C/A and L2C bands.
- Horizontal position accuracy: 2.5 m without RTK, 0.010 m with RTK.
- Time to first fix: 25 s cold, 2 s hot.
- Max navigation rate: 25 Hz PVT over the UBX binary protocol, 20 Hz RTK, 25 Hz raw.
- Voltage 5 V or 3.3 V supply, all logic 3.3 V; current 68 mA to 130 mA depending on constellations and tracking state.
- Max altitude 50 km; max velocity 500 m/s.
- Panel-mountable SMA antenna connector; 2x Qwiic connectors; USB-C, UART1, UART2 and SPI broken out.
- Dimensions 43.5 mm x 43.2 mm; weight 6.8 g.
Package Includes
- 1 x SparkFun GPS-16481 GPS-RTK-SMA Breakout - ZED-F9P (Qwiic)
No GNSS antenna, SMA cable, Qwiic cable, pin headers or host controller is included. Rulers in the scale photograph and any antenna, cables and controller boards shown in connection photographs are reference items, not package contents.