
Add untethered dead reckoning GPS to a drone, rover or vehicle tracker with the SparkFun GPS-16329. This breakout carries the u-blox NEO-M8U receiver with built-in 3D inertial sensors, so it keeps producing positions through tunnels, parking garages and dense urban areas where a normal GPS loses lock, without any electrical connection to the vehicle.
Two Qwiic connectors give solderless I2C hookup, while 0.1-inch pads break out UART, SPI, PPS, interrupt, safeboot and reset signals. An onboard rechargeable battery backs up the RTC and orbit data, cutting time-to-first-fix from a 26-second cold start to a 1.5-second hot start.
Features
- u-blox NEO-M8U module with Untethered Dead Reckoning (UDR) sensor fusion.
- 72-channel u-blox M8 GNSS engine tracking GPS, GLONASS, Galileo and BeiDou, three constellations concurrently.
- About 2.5 m horizontal accuracy with position updates up to 30 Hz.
- Built-in accelerometer and gyroscope for continuous positioning during complete signal loss.
- Two Qwiic (JST-SH) connectors for I2C; 0.1-inch pads for UART, SPI, PPS, INT, SAFE and RST.
- U.FL connector for the external GPS antenna of your choice.
- Onboard rechargeable backup battery for RTC and GNSS orbit data.
- Configurable with u-center or the SparkFun u-blox GNSS Arduino Library: baud rates, update rates, geofencing, spoofing detection and more.
Specifications
- Manufacturer part number: GPS-16329.
- GNSS receiver: u-blox NEO-M8U, 72 channels.
- Time to first fix: about 26 s cold, 1.5 s hot.
- Maximum altitude 50,000 m, maximum velocity 500 m/s, maximum 4 g.
- Velocity accuracy 0.5 m/s, heading accuracy 1 degree.
- Time pulse accuracy 30 ns.
- Supply and I/O: 3.3 V.
- Current consumption: about 29 mA continuous tracking, default concurrent mode.
Connection and Setup
Connect an external GPS antenna to the U.FL connector and give it a clear view of the sky. Use a Qwiic cable for solderless I2C, or solder wires or headers to the 0.1-inch pads for UART, SPI and the timing signals. The board runs at 3.3 V logic.
The hookup guide covers wiring, u-center configuration and examples for the SparkFun u-blox GNSS Arduino Library and Python. Because dead reckoning is sensor-based, mount the board firmly so the inertial sensors track the vehicle.
Package Includes
- 1 x SparkFun GPS-16329 GPS Dead Reckoning Breakout - NEO-M8U (Qwiic).
No GPS antenna, U.FL cable, Qwiic cable, pin headers or host controller is included. Rulers in the scale photograph and the RedBoard, antenna and cables in the connection photograph are reference items, not package contents.