
SparkFun GNSS Flex pHAT - LG290P for Raspberry Pi
The SparkFun GNSS Flex pHAT - LG290P (GPS-28929) is an all-in-one development kit that combines the quad-band Quectel LG290P GNSS receiver with the SparkFun GNSS Flex pHAT carrier, bringing centimeter-level RTK positioning to a Raspberry Pi or any other 40-pin single-board computer. The pHAT acts as the bridge between the SBC and the modular SparkPNT ecosystem: it mounts via an extended 40-pin header and connects to the included GNSS module through standardized 2x10-pin Flex headers, so modules can be swapped for future upgrades.
At the heart of the kit is the Quectel LG290P, a quad-band high-precision receiver engineered for fast convergence and reliable performance in challenging RF environments. A built-in NIC anti-jamming unit provides professional-grade interference detection and suppression, making the board suited to navigation in urban canyons, industrial sites and other locations where signal integrity is critical. The pHAT adds a USB-C port as an alternative data interface to the GNSS module, a microSD card slot for data logging, and U.FL/SMA antenna bridging options.
Features
- Quectel LG290P quad-band GNSS module with RTK positioning and advanced NIC anti-jamming
- GNSS bands: L1, L2, L5, E6; constellations: GPS, GLONASS, Galileo, BDS, QZSS, NavIC
- RTK accuracy: 0.8 cm + 1 ppm horizontal, 1.5 cm + 1 ppm vertical
- Update rate: 10 Hz default, 20 Hz maximum
- 40-pin extended header for direct connection to Raspberry Pi, NVIDIA Jetson Orin Nano, Google Coral and other compatible single-board computers
- Standardized 2x10-pin SparkPNT GNSS Flex module headers for replaceable GNSS modules
- Interfaces: UART, I2C (Qwiic), PPS, USB-C and microSD card slot
- Antenna connection via U.FL with SMA bridging option
- Module supply 3.15 V to 3.45 V, operating temperature -40 to +85 C; module footprint 12.2 mm x 16 mm x 2.6 mm, approx. 0.9 g
Package Includes
- 1 x SparkFun GNSS Flex pHAT carrier board
- 1 x SparkPNT GNSS Flex Module - LG290P
- 1 x Extended 40-pin GPIO header with standoffs and screws
No GNSS antenna and no Raspberry Pi or other single-board computer is included; these are available separately and are required for operation. A microSD card, if needed for logging, is also not included.