
SparkFun Environmental Sensor - BME688 (Qwiic)
The SparkFun BME688 Environmental Sensor combines gas, temperature, humidity and barometric pressure sensing in a single 1 x 1 inch Qwiic breakout. The Bosch BME688 gas sensor responds to a broad range of gases, including volatile organic compounds (VOCs), volatile sulfur compounds (VSCs), carbon monoxide and hydrogen, with sensitivity into the part-per-billion (ppb) range, alongside precise temperature, humidity and pressure measurement.
The BME688 is a drop-in replacement for the BME680 and adds intelligent gas scanning: instead of only detecting the presence of gases, the sensor generates unique profiles for different gas mixtures. The default I2C interface is routed to solderless Qwiic connectors, and all essential pins are broken out to standard 0.1-inch-spaced headers for breadboard use or SPI communication.
Key capabilities include intelligent gas scanning that generates unique profiles for different gas mixtures rather than selective measurements of individual gases, with a maker-quoted H2S scanning F1 score of 0.92; temperature, relative humidity and barometric pressure measurement at +/-1.0 C, +/-3% RH and +/-60 Pa respectively; and low power draw of 0.15 uA in sleep mode and typically 3.9 mA during a standard 10.8-second gas scan. The sensor works with the Bosch BSEC2 Arduino library and BME AI-Studio for gas-profile training.
Usage notes: the default I2C address is 0x76 (jumper-selectable 0x77). The gas sensor's readings depend on internal heater profiles; see the Bosch BSEC2 library documentation for scan modes and warm-up behavior.
Limitations: the BME688 is a broadly responsive gas sensor; its output represents gas-mixture profiles and air-quality indices, not selective quantitative measurement of each listed gas. This board is intended for experimental environmental sensing and data logging. It is not a certified carbon monoxide, smoke or gas-leak alarm and is not a substitute for certified safety equipment.
Features
- Bosch BME688 gas, temperature, humidity and pressure sensor
- Broadly responsive to VOCs, VSCs, carbon monoxide, hydrogen and other gases in the ppb range
- Temperature accuracy +/-1.0 C; humidity +/-3% RH; pressure +/-60 Pa
- I2C (Qwiic) by default, address 0x76 (jumper to 0x77); SPI via broken-out pins
- Low power: 0.15 uA sleep, typically 3.9 mA per 10.8-second standard gas scan
- Compatible with Bosch BSEC2 Arduino library and BME AI-Studio
- 1 x 1 inch Qwiic breakout board
Package Includes
- 1 x SparkFun Environmental Sensor - BME688 (Qwiic)
Qwiic cable, headers and microcontroller are not included.