RP600A 3D Printing Pen 5V 2A USB Power 0.6mm Nozzle Adjustable Speed - RS2336

• Color: Blue
• Power Supply: 5V/2A
• Power Supplier: AC/DC adapter or power bank
• Pen Material: Plastic

Description:

This is a RP600A 3D Printer Printing Pen With Adjustable Speed, Upgraded 3D Printer Motors. This RP600A PLA 3D pen is featured with one button control for drawing as easy as writing. Whether you want to load in a fresh string of plastic or swap the existing one for a different color, it should be simple and fast to load and unload filament. 3D Pen give you a choice of extrusion speeds make it easier to switch between slower detail work and faster infill work. This 3D printer pen is the best gift for kids that helps children to improve spatial and dimensional thinking.

Specification:

• Color: Blue
• Power Supply: 5V/2A
• Power Supplier: AC/DC adapter or power bank
• Pen Material: Plastic
• Nozzle Diameter: 0.6mm
• Nozzle Material: Ceramic
• Printing material: 1.5~1.75mm ABS/PLA filament
• Print range: Unlimited
• Molding speed: Adjustable
• Temperature: 130~240℃ adjustable
• Input voltage: 100~240V, 50~60Hz

Features:

• Can be driven by power bank, no need connect to AC/DC adapter
• Double click loading/unloading button to filling and remove filament automatically
• It has super slim design

How To Use:

• Connect AC/DC adapter to AC power socket and 3D pen DC power socket (or use the USB cable to connect with the power bank which output is more than 2A), when the red LED turns on,the pen is in the stanby status.
• Press the filament loading button,it starts to heat,and the green light will flash,after around 40 seconds ,the green light stop flashing,it means it is ready for loading filament
• Insert the 1.75mm filament into the "filament loading hole",Keep pressing the "filament loading button",the material will be loaded . Hold till plastic material comes out from the nozzle ,it means the filament is ready.( Double press the button can load the filament automatically, press the button again to exit automatic mode)
• Temperature adjustment: open the black cover ,and use the plastic screwdriver to turn the temperature switch(clockwise temperature up,anticlockwise temperature down,each level is 15°C),temperature range is 130°C-240°C
• Speed adjustment: slip the speed controller to adjust the speed
• Unload filament: do as the Item 2,then press unload filament button ,the filament will move out automatically.(Double press the button can unload the filament automatically, press the button again to exit automatic mode)
• Replace nozzle set: open the black cover by the plastic screwdriver ,and remove the screw,then plug off the nozzle set

Package Included:

• 1 x RP800A 3D Printing Pen
• 1 x Adapter
• 3 x Test Filament (Random Color)