Skip to product information
1 of 3

vendor-unknown

Raspberry PI VGA 666 Adapter Board for Raspberry Pi 3 Model B/ Pi 2/ B+/A+ - RS176

Raspberry PI VGA 666 Adapter Board for Raspberry Pi 3 Model B/ Pi 2/ B+/A+ - RS176

SKU:RS176

15 in stock

Regular price Rs. 565.00
Regular price Sale price Rs. 565.00
Sale Sold out
Shipping calculated at checkout.

For refund/return/replacement, call us at +91 95995 94524 For bulk and B2B enquiries kindly mail us at support@rees52.com

  • Fast Shipping
  • Affordable Price
  • Support
View full details
  • The VGA output supports resolution:from 800x600 up to 30fps
  • With 6 bits per channel you have a maximum of 262144 colors
  • Easy to setup. Easy to configure.

Description:

This Module has another name: Gert-VGA-adapter, or Passive VGA adapter 666 for Raspberry Pi A+/B+/2B/3B/Zero. The Raspberry Pi has an HDMI port to connect a display. If your monitor only has VGA, you have to use an adapter. Because this requires a digital-to-analog conversion, those adapters can be quite pricey, and they can draw lots of power. As well as just allowing you to connect a VGA monitor natively. And unlike composite video, the DPI interface can be run independently of the HDMI. The software for dual screens is still under development. Running two screens at maximum resolution will depend on the speed of GPIO. This wasn’t possible on the Model A or B. And there’s a catch: as the board uses most of your GPIO pins, you lose access to them.

How to use it:


Edit /boot/config.txt file with vim.tiny or other editor. and modify as following:


framebuffer_width=800
framebuffer_height=600
dpi_group=2
device_tree=bcm2710-rpi-3-b.dtb
dpi_mode=86
dtparam=i2c_arm=off
dtparam=spi=off
dtparam=uart0=off
dtparam=uart1=off
dtoverlay=pi3-disable-bt-overlay
dtoverlay=vga666
enable_dpi_lcd=1
display_default_lcd=1
force_pwm_open=0
dtparam=audio=on
start_x=1
gpu_mem=128

Features:

  • You should disable all of GPIO pin's function so that it can work properly.
  • we strongly recommend that you use 800x600 resolution.
  • the high resolution will slow down your Pi and cost more RAM.

Note:

This add-on board uses all but 6 of the GPIO pins so it may not be possible to use other add-on boards at the same time as the VGA adapter.
The color of the item might be slightly different from the picture shown, which mainly lies in different light effect and computer monitor. Please give us your understanding. Thank you!

Package Included:

1 x VGA 666 Adapter Board For Raspberry Pi 3B / 2B / B+ / A+