- Nominal Voltage: DC 5V
- Current: 0.2A
- Size: About 65 x 56 x 9mm/ 2.56 x 2.20 x 0.35in
- Suitable Model: for Raspberry Pi 4B+/ 3B+, 3B / 2B+, 2B / B
Description:
This is a Raspberry Pi 4 Cooling Glare Fan Expansion Board. With wide application ran, Compatible with all versions of raspberry pie footnotes, Raspberry pin pins can be used, the board is suitable for Raspberry Pi 4B/3B+/3B/2B+/2B/B. The Expansion board is made of PCB process, it with LED, will bring the dazzling effect. You could see the LED light from the heat sink icon after you finished the installation. It has a clear pin mark, GPIO function is fully displayed. All GPIO pins are pulled out, So when the Raspberry Pi is being cooled, its development function will not be affected. The cooling fan adopts active cooling mode, the heat can be discharged in time. On the other hand, keep the raspberry pi connection to be convenient.
Specification:
- Nominal Voltage: DC 5V
- Current: 0.2A
- Size: About 65 x 56 x 9mm/ 2.56 x 2.20 x 0.35in
- Suitable Model: for Raspberry Pi 4B / 3B+, 3B / 2B+, 2B / B
Features:
- Compatible with all Raspberry Pi pins, clear pin marks on the PCB, making GPIO functions at a glance.
- The GPIO is completely extended out, and the heat dissipation does not affect the development and use.
- There are switches to control the cooling fan and LED. It is recommended to always open when using Raspberry Pi 4.
- Especially increase the height between the fan and the chip, expand the negative pressure area, and make better heat dissipation.
- Take the active cooling installation method, the heat dissipation effect is better than the passive way.
- Cooling down the temperature of working Raspberry Pi by about 10-20 degrees
Note: Raspberry Pi board is not included in the package.
Package Included:
- 1 x Cooling Fan Expansion Board
- 4 x Copper Column
- 9 x Screws