
The RadioMaster ER8GV is a slim eight-channel PWM receiver with a built-in barometric vario for gliders and fixed-wing models. Its 2.4GHz ExpressLRS link, two 20cm antennas and voltage telemetry suit installations that need a narrow receiver without giving up eight servo outputs.
Choose the correct model: This is the ER8GV with vario, not the ER8G without vario. A compatible 2.4GHz ExpressLRS transmitter and matching firmware settings are required. It does not bind to 868/915MHz ExpressLRS or non-ELRS radios. The transmitter shown in the manufacturer illustration is not included.
Features
- Eight PWM output channels for compatible servos and model controls.
- Built-in barometric vario for altitude-change telemetry.
- Dual 20cm antennas with adjustable telemetry power up to 100mW.
- Receiver-supply or external-battery voltage telemetry, one source read at a time.
- Wi-Fi updates and ExpressLRS WebUI configuration.
- Four-pin CRSF interface and configurable CRSF/SBUS serial output. Check the manual and firmware mapping before wiring serial devices.
Specifications
- Model: RadioMaster ER8GV
- Protocol: 2.4GHz ExpressLRS
- Output: 8-channel PWM
- Receiver supply: DC 3.5-8.4V
- External voltage measurement: DC 4.0-35V
- Maximum telemetry power: 100mW, adjustable
- Antenna length: 20cm
- Dimensions: 60 x 13.5 x 13mm
- Weight: 12g
Installation Notes
EXT-V is a battery-voltage measurement connection, not a receiver power input. Never apply flight-battery voltage above 8.4V to the receiver supply pins. Check connector polarity, BEC capacity, servo voltage ratings and the official pinout before connecting power. Follow the manual's power-input guidance and do not use channel 6 as a power input. Voltage telemetry may need calibration on the transmitter.
Package Includes
- 1 x RadioMaster ER8GV receiver with vario.
- 2 x heat-shrink tubes.
- 1 x Type-A voltage telemetry wire.
- 1 x CRSF wire.
- 1 x ELRS-RX-SBUS wire.
- 1 x user card.
Transmitter, servos, flight controller and battery are not included.