
The RadioMaster ER8G is a slim eight-channel 2.4GHz ExpressLRS PWM receiver for fixed-wing aircraft and gliders. It connects directly to up to eight servos and combines dual antennas with receiver and flight-battery voltage telemetry.
Choose the correct model: This is the ER8G, without a built-in vario or altimeter. It is not the ER8GV version. Use a compatible 2.4GHz ExpressLRS transmitter with matching firmware configuration; it will not bind to 868/915MHz ExpressLRS systems or non-ELRS transmitters.
Power and telemetry: The receiver supply is DC 3.5-8.4V. The separate EXT-V telemetry input measures DC 4.0-35V and is not a receiver power input. Never apply the flight-battery voltage to the servo rail. Follow the official manual for the BEC connection, shared reference and voltage calibration. The manual specifies receiver power through channels 1-5, not channel 6. Only one voltage source can be measured at a time.
Wi-Fi updates and WebUI setup let you configure the receiver for your model. Set servo-compatible packet rates, channel mapping, arming and fail-safe before use. The four-pin CRSF connector is reserved for optional telemetry sensors; it should not be treated as a promise that every sensor is supported.
Features
- Eight PWM channels for direct servo connections
- 2.4GHz ExpressLRS radio link
- Dual 20cm high-sensitivity antennas
- Receiver or external flight-battery voltage telemetry
- Telemetry output power up to 100mW, adjustable in LUA
- Wi-Fi firmware updates and WebUI configuration
- Slim 60 x 13.5 x 13mm format
- No built-in vario
Specifications
- Model: RadioMaster ER8G
- Wireless protocol: 2.4GHz ExpressLRS
- PWM channels: 8
- Receiver supply: DC 3.5-8.4V
- External battery voltage measurement: DC 4.0-35V
- Maximum telemetry power: 100mW, LUA adjustable
- Antenna length: 20cm
- Dimensions: 60 x 13.5 x 13mm
- Weight: 12g
Package Includes
- 1 x RadioMaster ER8G receiver
- 2 x heat-shrink tubes
- 1 x Type-A voltage telemetry wire
- 1 x CRSF wire
- 1 x ELRS RX SBUS wire
- 1 x user card