
The RadioMaster ER6GV combines a six-channel PWM receiver with a built-in barometric vario for gliders and fixed-wing models. Its 2.4GHz ExpressLRS link, two 15cm antennas and slim 42 x 13 x 8mm board make it suitable for narrow fuselages and direct servo connections.
Choose the correct model: This is the ER6GV with vario, not the ER6G without vario. Use a compatible 2.4GHz ExpressLRS transmitter and matching firmware settings. It does not bind to 868/915MHz ExpressLRS or non-ELRS radios. Check your competition rules before using a receiver with a vario.
Features
- Six PWM output channels, with five fitted channel pin headers.
- Channel 6 is available on the board and requires installation of an optional three-pin connector.
- Built-in barometric vario for altitude-change telemetry.
- Dual 15cm antennas and adjustable telemetry output up to 50mW.
- Receiver-supply or external-battery voltage telemetry, one source read at a time.
- Wi-Fi updates and ExpressLRS WebUI configuration.
Specifications
- Model: RadioMaster ER6GV
- Protocol: 2.4GHz ExpressLRS
- Output: 6-channel PWM
- Receiver supply: DC 3.5-8.4V
- External voltage measurement: DC 3.0-26V
- Maximum telemetry power: 50mW, adjustable
- Antenna length: 15cm
- Dimensions: 42 x 13 x 8mm
- Weight: 5g
Installation Notes
Power the receiver through channels 1-5 only. Channel 6 is a servo output, not a power input. EXT-V is the separate battery-voltage measurement pad, not receiver power. Check polarity, BEC current capacity, servo voltage, channel mapping and fail-safe before use. Do not connect flight-battery voltage to the servo power rail. Calibrate voltage telemetry against the actual battery voltage.
Package Includes
- 1 x RadioMaster ER6GV receiver with vario.
- 1 x Type-A voltage telemetry wire.
- 2 x heat-shrink tubes.
- 1 x user card.
Transmitter, servos, battery and optional channel-6 connector are not included.