
The RadioMaster ER6G is a compact six-channel 2.4GHz ExpressLRS PWM receiver for fixed-wing aircraft and gliders. It has direct servo outputs, dual antennas and voltage telemetry in a slim, lightweight board format.
Model and compatibility: This is the ER6G without a built-in vario or altimeter, not the ER6GV. Use a compatible 2.4GHz ExpressLRS radio with matching firmware settings. It does not bind to 868/915MHz ELRS or non-ELRS transmitters.
Installation: Power the receiver with DC 3.5-8.4V through channels 1-5. Do not use channel 6 as a power input. The separate EXT-V pad is for flight-battery voltage measurement, not receiver power. Its specified measurement range is DC 3.0-26V. Check polarity, the BEC connection and servo current requirements before applying power. Do not feed flight-battery voltage into the servo rail.
The receiver can report receiver supply voltage or external battery voltage, with one source read at a time. Follow the official manual to wire and calibrate voltage telemetry. Wi-Fi updates and WebUI setup support configuration for the installed model. Check servo packet rates, channel mapping, arming and fail-safe before use.
Features
- Six PWM channels for direct servo connections
- 2.4GHz ExpressLRS link
- Dual 15cm high-sensitivity antennas
- Receiver or flight-battery voltage telemetry
- Telemetry output power up to 50mW, adjustable in LUA
- Wi-Fi updates and WebUI configuration
- Compact 42 x 13 x 8mm board, weighing 5g
- No built-in vario
Specifications
- Model: RadioMaster ER6G
- Wireless protocol: 2.4GHz ExpressLRS
- PWM channels: 6
- Receiver supply: DC 3.5-8.4V
- External battery voltage measurement: DC 3.0-26V
- Maximum telemetry power: 50mW, LUA adjustable
- Antenna length: 15cm
- Dimensions: 42 x 13 x 8mm
- Weight: 5g
Package Includes
- 1 x RadioMaster ER6G receiver
- 1 x Type-A voltage telemetry wire
- 2 x heat-shrink tubes
- 1 x user card