
The RadioMaster ER6 is a 6-channel PWM receiver built on the ExpressLRS open-source protocol, made for fixed-wing aircraft, cars, boats and any build that drives servos directly instead of going through a flight controller. It runs on a wide DC 4.5 - 8.4V input, check the supply and servo voltage ratings before connecting power.
It carries dual antennas with up to 100mW telemetry power (adjustable in the ExpressLRS Lua script), giving a strong return link for telemetry-heavy setups. Voltage telemetry is built in: the receiver automatically detects whether to report its own supply voltage or an external battery pack (4.0 - 35V) connected through the included BATT lead. A 4-pin CRSF port is reserved for serial output (CRSF/SBUS) or later telemetry-sensor expansion. Firmware updates and configuration work over WiFi through the ExpressLRS WebUI.
The one-piece molded shell keeps the board protected, and standard 2.54mm servo connectors make it a drop-in for conventional RC wiring.
Note: check channel and BATT polarity before connecting servos or an external battery, and bind/update using the ExpressLRS target "Radiomaster 2.4Ghz / ER6 2.4GHz Diversity+6xPWM RX".
Features
- 6 PWM servo channels on standard 2.54mm connectors
- ExpressLRS 2.4GHz with high-sensitivity dual antennas
- Telemetry power up to 100mW (Lua adjustable)
- Automatic receiver-voltage or external-battery telemetry (4.0 - 35V)
- Wide DC 4.5 - 8.4V supply input
- Reserved 4-pin CRSF port (CRSF/SBUS serial output, sensor expansion)
- WiFi firmware updates and WebUI configuration
- One-piece molded shell, 43 x 25 x 15 mm, 14.5 g
- Compatible with all 2.4GHz ExpressLRS modules and radios
Specifications
- Power supply: DC 4.5 - 8.4V
- Output channels: 6CH PWM
- Serial output: CRSF / SBUS
- Telemetry power: max 100mW (Lua adjustable)
- Battery voltage detection: DC 4.0 - 35V
- Bus interface: CRSF
- Weight: 14.5 g
- Dimensions: 43 x 25 x 15 mm
- Firmware target: Radiomaster 2.4Ghz / ER6 2.4GHz Diversity+6xPWM RX
Package Includes
- 1 x ER6 receiver
- 1 x voltage telemetry wire (Type-B)
- 1 x CRSF wire
- 1 x ELRS-RX-SBUS wire
- 1 x user card