Description:
New layout from Pixhawk, integrating the full functions and setting the same as PIXHAWK. CrossFlight Flight Controller can support redevelopment.
Specifications:
CrossFlight Flight Controller:
- Processor: HC32F4A0PITB
- Gyro: ICM42670
- Compass: VCM5883
- Barometer: LPS22HB
- FRAM: Without FRAM, use the internal flash to store parameters, 2617 waypoints for multi-copters, and 2623 waypoints for airplanes
- Connector: JST GH1.25 Connector
- PWM Output: 10 PWM Output
- Mavlink UART: 2(without CTSRTS)
- USB Port: 1(Type-C)
- GPS UART/I2C Port: 1
- RC In Signal Input: PPM/SBUS
- RSSI Output: Do not support
- OSD Module: OSD Module Integrated
- ESC Protocol: PWM
- DSHOT Protocol: Do not support
- ONESHOT Protocol: Do not support
- Neopix Led: Support
- Gripper Function: Support
- RTK：Support
- USB Voltage: 5V±0.3V
- Servo Voltage: Not applicable
- Operating Temperature: -40~80℃
- Adaptable Models: 3-8 copter/Airplane/Helicopter/Car/Boat
- Dimention: 39.7*39.7*13mm (1.56"*1.56"*0.51")
- Weight: 16.5g(0.58oz), 54g(1.9oz when all the connect wires included)
Power Module:
- Input Voltage: 2-12S
- Input Current: 90A
- Output Voltage: 5.1V
- Output Current(BEC): 2.5A
- Input Current(connect to one ESC only): 20A
Features:
- Vibration Damping by Software: Ensure the accuracy of sensor data at all times, achieve better Altitude Hold effect, and make the flight more stable.
- OSD Module Integrated: Support real-time graphically display OSD information such as the flight direction and position of the aircraft without the need for an external OSD module.
- 10 Channels PWM Output: Adaptable to 3-8 Axis Multirotor, Airplanes, helicopters, cars, boats and multiple industries.
- Mini Size as F4: Only 39.7*39.7*13mm and 16.5g, helps save space and reduce total weight to lengthen the flight time.
- Easier Installation and Setting: Offer comprehensive technical support including the usage guidance needed for all functions from basic use, PID parameter adjustment, log viewing, etc. of each model.
- Automation Software Testing System: The same Automation Software Testing System as PIXHAWK and Mini Pix helps realizes test automation from the sensor to connection ports and interface.
Package Included:
- 1 x CrossFlight Flight Controller
- 1 x Power Module(Support 2-12S)
- 1 x Buzzer
- 1 x I2C Transfer Board
- 1 x FC Status Indicate LED
- 1 x 4G TF (MicroSD) Card
- 1 x Buzzer & Receiver Connect Cable
- 1 x Power Module Connect Cable
- 1 x I2C Transfer Board Connect Cable
- 1 x OSD Port Connect Cable
- 2 x TELEM1&2 Ports Connect Cable
- 1 x FC Status Indicate LED Cable
- 1 x Double-sided Adhesive Tape
- 1 x Type-C Cable
- 1 x User Manual