
This blue QS8-S male connector is a solder-termination power connector for a matching QS8-S system. The pack contains one connector half and its separate blue wire cover, not a male/female pair. Check the contact shape, housing keying and polarity against your existing connector before ordering.
Features
- Blue keyed housing with two power contacts and a separate rear wire cover.
- Gold-plated brass contacts and fibre-reinforced nylon housing, as specified by QS Connector.
- Anti-spark connection design for compatible mating connectors. It is not a fuse, circuit breaker or load-disconnect switch.
- Solder termination for custom battery, ESC and power-system wiring.
Specifications
| Product | QS8-S blue male connector half |
|---|---|
| Contacts | Two power contacts |
| Housing | Fibre-reinforced nylon; blue |
| Contact material | Gold-plated brass |
| Manufacturer wire range | 8 AWG to 12 AWG |
| Manufacturer material temperature range | -30°C to +150°C. This does not establish a safe operating current for an assembled cable. |
| Manufacturer flame rating | UL94 V-0 material specification |
| Connection | Solder termination; matching connector required |
Connection and safety
- Isolate the power source and check that the connector is the correct matching QS8-S type. Gender names can describe the housing or the metal contact differently across suppliers, so compare the photographs and contact shape.
- Confirm positive and negative markings on both connector halves with a meter. Do not infer polarity from a photograph or from wire colour alone.
- Fit the rear cover before soldering. Use suitable wire, strain relief and insulation, then inspect each joint and check for shorts before connecting power.
- Select wire, fusing and operating current from the requirements of the complete system. Published current figures vary between suppliers and are not a substitute for an application-specific thermal assessment.
- Do not connect or disconnect under load. Anti-spark construction does not remove short-circuit, fire or battery hazards.
Package Includes
- 1 x blue QS8-S male connector half
- 1 x matching blue rear wire cover
Not included: mating female connector, wire, battery, ESC, solder or tools. Any wired photograph is an installation example only.