- Input Supply Voltage: 3.3 ~ 5V
- Model: PL2303
- Support: Windows 98 to Windows 7 (32 bit and 64 bit), Mac OS 8 to OS X (32 bit and 64 bit), Linux
Description:
A handy USB to TTL converter based on the PL2303HX.3 LEDs are on-board to indicate power, data reception, and data transmission. A 5V and 3.3V output are available--you can power your project directly from the USB port, so it functions as a USB power supply, too. The 5-pin I/O is clearly labeled on the board. A handy USB to TTL converter based on the PL2303HX. It's a small USB to TTL serial tool, using the PL2303 chip. You can use it to connect some serial device to your PC via a USB port.
Specification :
- Input Supply Voltage: 3.3 ~ 5V
- Model: PL2303
- Support: Windows 98 to Windows 7 (32 bit and 64 bit), Mac OS 8 to OS X (32 bit and 64 bit), Linux
Features:
- Imported original control chip PL2303HX,
- A high-speed stable brush machine set two data transmission indicators can monitor the status of data transmission for 3.3V and 5V pin interface,
- Different voltage power supply systems need a convenient brush pin interface and parallel board,
- Rather than a vertical installation and board,
- Leads to the DuPont line convenient brush machine of the entire circuit board with high-quality transparent heat shrinkable coating,
- The piece circuit and the outside into the insulating state In order to protect the metal board from the accidental short circuit and burned,
- Due to the use of transparent material, it does not affect the board and watches the lights mouth screen monitoring effect
- The 5-pin I/O is clearly labeled on the board. Excellent driver support--drivers are available for Windows 98 to Windows 7 (32-bit and 64-bit), Mac OS 8 to OS X (32-bit and 64-bit), and Linux. Even Android is supported!
Application:
- All kinds of satellite set-top box upgrades.
- Router, HDD, ADSL, broadband modem firmware upgrade, or cracked upgrade.
- cellphone, XBOX360, GPS serial communication, vehicle inspection and test, DVD flash, and so on.
- Burn writes STC MCU, NXP MCU, Renesas MCU, NEC MCU, and so on.
- Simple UART communication commonly used UART debugging tools in the supper terminal.
- USB signal transferred to the TTL signal may be used by electronic enthusiasts.
Package Included:
1 x PL2303 USB to Serial Module for Arduino Raspberry PI & Other MCU