
Piezo Vibration Sensor - Large
The Piezo Vibration Sensor - Large (SparkFun SEN-09196) is a laminated piezoelectric film element made by TE Connectivity under its Measurement Specialties line (LDT0-028K) and sold by SparkFun for easy prototyping. It is often used for flex, touch, vibration and shock measurements, and also works well as an impact sensor or a flexible switch.
When the film moves back and forth it produces a small AC signal with a surprisingly large voltage swing, up to +/-90V, and unloaded spikes at that level can permanently damage a microcontroller's ADC pins. SparkFun's hookup guide demonstrates one simple damping approach: a 1M ohm resistor wired in parallel with the sensor. In the guide's own measured example with an Arduino Uno on pin A0, that loading brought the spikes to between -0.5V and +5V, within the ATmega328 I/O pin tolerance, and the guide also suggests zener-diode clamping or op-amp buffering as more robust options. Treat that circuit as the guide's starting example rather than a universal guarantee, and size the protection for your own setup.
The sensor is a flexible PVDF piezo polymer film with a wide dynamic range, laminated for higher voltage output. It ships with solderable crimp pins and 0.1-inch breadboard friendly leads, so it drops straight onto a standard breadboard or perfboard.
Features
- Flexible PVDF piezo polymer film (TE Connectivity Measurement Specialties LDT0-028K)
- Generates up to +/-90V when flexed or struck - use a resistor to scale it for an ADC
- Wide dynamic range for tap, knock, vibration, shock and flex sensing
- Laminated construction for higher voltage output
- Solderable crimp pins, 0.1-inch breadboard friendly leads
Package Includes
- 1 x Piezo Vibration Sensor - Large (SparkFun SEN-09196 / TE LDT0-028K)
Not included: resistor, breadboard, jumper wires or microcontroller - the Arduino and accessories shown in the wiring diagram and output plots are for illustration only.