
Mornsun LI60-20B05PR2 Power Supply
The Mornsun LI60-20B05PR2 is a DIN-rail AC-DC power supply providing a regulated 5V DC output at up to 6.5A, with a rated output power of 32.5W. It accepts the AC or DC input ranges listed below and is designed for integration into finished equipment.
A 32.5W DIN-rail supply with a 6.5A 5V output for logic and control electronics.
Key Features
- Adjustable DC output (4.9-5.5V) for compatible equipment and control circuits.
- 84% typical efficiency at 230VAC.
- 4000VAC input-to-output isolation test rating.
- Protection against short-circuit, over-current and over-voltage faults.
- Clips onto a standard 35mm DIN rail inside a control cabinet.
- Free air convection. Allow suitable airflow and installation clearance.
Technical Specifications
| Model | LI60-20B05PR2 |
|---|---|
| Nominal output | 5V DC / 6.5A |
| Rated output power | 32.5W |
| Output adjustment | 4.9-5.5V DC |
| AC input | 85-264VAC |
| DC input | 120-370VDC |
| Typical efficiency at 230VAC | 84% |
| Maximum capacitive load | 20000µF |
| Input-output isolation test | 4000VAC |
| Operating temperature | -40°C to +70°C, with derating above +50°C |
| Dimensions | 92.66 × 52 × 58mm |
| Cooling | Free air convection |
Selection and Installation
Match the output rails to your load, and allow for its continuous current and start-up demand. Follow the manufacturer's derating curves: the maximum output is not available at every input voltage or ambient temperature. Adjusting the output voltage does not increase the permitted output power or current.
This is a component power supply, not a consumer plug-in adapter. Mains wiring should be carried out by a qualified person in a suitable protective enclosure. Disconnect input power before connecting wires, follow the marked terminal assignments and protective-earth requirements, and keep ventilation paths clear. The isolation figure is a test rating, not a continuous operating voltage.
Package contents: 1 × Mornsun LI60-20B05PR2 power supply.
Manufacturer datasheet: specifications, dimensions and derating curves. Product images are for reference; follow the supplied unit's markings and documentation.