
Mornsun LI100-20B48PR2 Power Supply
The Mornsun LI100-20B48PR2 is a DIN-rail AC-DC power supply providing a regulated 48V DC output at up to 2.1A, with a rated output power of 100.8W. It accepts the AC or DC input ranges listed below and is designed for integration into finished equipment.
A 100W-class DIN-rail supply with a 48V output for automation and control loads.
Key Features
- Adjustable DC output (43.2-55.2V) for compatible equipment and control circuits.
- 90% typical efficiency at 230VAC.
- 4000VAC input-to-output isolation test rating.
- Protection against short-circuit, over-current and over-voltage faults.
- Clips onto a standard 35mm DIN rail inside a control cabinet.
- Free air convection. Allow suitable airflow and installation clearance.
Technical Specifications
| Model | LI100-20B48PR2 |
|---|---|
| Nominal output | 48V DC / 2.1A |
| Rated output power | 100.8W |
| Output adjustment | 43.2-55.2V DC |
| AC input | 85-264VAC |
| DC input | 120-370VDC |
| Typical efficiency at 230VAC | 90% |
| Maximum capacitive load | 1100µF |
| Input-output isolation test | 4000VAC |
| Operating temperature | -40°C to +70°C, with derating above +50°C |
| Dimensions | 70 × 92.66 × 58mm |
| Cooling | Free air convection |
Selection and Installation
Match the output rails to your load, and allow for its continuous current and start-up demand. Follow the manufacturer's derating curves: the maximum output is not available at every input voltage or ambient temperature. Adjusting the output voltage does not increase the permitted output power or current.
This is a component power supply, not a consumer plug-in adapter. Mains wiring should be carried out by a qualified person in a suitable protective enclosure. Disconnect input power before connecting wires, follow the marked terminal assignments and protective-earth requirements, and keep ventilation paths clear. The isolation figure is a test rating, not a continuous operating voltage.
Package contents: 1 × Mornsun LI100-20B48PR2 power supply.
Manufacturer datasheet: specifications, dimensions and derating curves. Product images are for reference; follow the supplied unit's markings and documentation.