- Power supply voltage: DC 2.5V - 12V
- Each channel has 800mA continuous current output
- The low saturation pressure drop
- Control and drive integrated into IC
- Pin high-pressure protection function
- Working temperature: 0°C - 80°C
Description:
The board has 6 male pins and 2 double terminals the motors connect to the 2 terminals in the middle of the male pins are the vcc and gnd pins. You only have to supply it one voltage (between 25 and 12v) the other 4 pins control the direction and speed of the motors pin a-ia and a-ib control motor a, and pin b-ia and b-ib control motor b. To control motor a you set pin a-ia high and pin a-ib low, to change the direction you just set pin a-ia low and pin a-ib high same thing for motor b.
Specifications:
- Power supply voltage: DC 2.5V - 12V
- Each channel has 800mA continuous current output
- The low saturation pressure drop
- TTL / CMOS output level compatible can be connected directly to the CPU
- Output built-in clamping diode, apply to the perceptual load
- Control and drive integrated into IC
- Pin high-pressure protection function
- Working temperature: 0°C - 80°C
Feature:
- Onboard two the L9110S motor control chip
- The module can simultaneously drive two DC motors or a 4-wire 2-phase stepper motor
- The 800mA continuous current output capability per channel
- Low static work current
- Each channel has 800mA continuous current output
- The low saturation pressure drop
- TTL/CMOS output level compatible can be connected directly to the CPU
- Output built-in clamping diode, apply to the perceptual load
- Control and drive integrated into IC
- Have pin high-pressure protection function
Package includes:
1 x L9110S H-bridge Stepper Motor Dual DC Motor Driver Controller Board
