- Main Chip: LM393
- Operating Voltage Range: 3.6~5V DC
- Average Current Consumption: 0.06mA
- Detection Angle: 35 °
- Distance Measuring Range: 2~30 cm
Description:
IR Infrared Obstacle Avoidance Sensor Module has a pair of infrared transmitting and receiving tubes. When the transmitted light waves are reflected, the reflected IR waves will be received by the receiver tube. The on-board comparator circuitry processes and the green indicator LED comes to life. The module features a 3-wire interface with VCC, GND and an OUTPUT pin on its tail. It works fine with 3.3 to 5V levels. Upon hindrance/ reflectance, the output pin gives out a digital signal (a low-level signal). The on-board preset helps to fine-tune the range of operation, effective distance range is 2cm to 80cm.
Specification:
- Main Chip: LM393
- Operating Voltage Range: 3.6~5V DC
- Average Current Consumption: 0.06mA
- Detection Angle: 35 °
- Distance Measuring Range: 2~30 cm
Features:
- Easy to assemble and use
- On-board detection indication
- The effective distance range of 2cm to 80cm
- A preset knob to fine-tune the distance range
- There is an obstacle, the green indicator light on the circuit board.
- Adjustable detection distance range via potentiometer:
- Clockwise: Increase detection distance
- Counter-clockwise: Reduce detection distance
Pin Description:
Pin, Control Indicator | Description |
---|---|
VCC | 3.3 to 5 Vdc Supply Input |
GND | Ground Input |
OUT | The output that goes low when an obstacle is in range |
Power LED | Illuminates when force is applied |
Obstacle LED | Illuminates when an obstacle is detected |
Distance Adjust | Adjust detection distance. CCW decreases distance. CW increases distance. |
IR Emitter | Infrared emitter LED |
IR Receiver | The infrared receiver that receives the signal transmitted by Infrared emit |
Package Included:
1 x IR Infrared Obstacle Avoidance Sensor Module for Arduino Smart Car Robot 3-wire, IR Module, IR Sensor Module