
INSLOGIC PLA Pro Black Filament, 1.75mm, 1kg
INSLOGIC PLA Pro is a modified polylactic acid filament for FDM 3D printers using 1.75mm material. This listing is for one 1kg spool in Black. It is PLA Pro, not PETG Pro, PETG-CF or an unspooled refill. The plain black colour suits prototypes, display models, housings and everyday project parts where a dark finish is preferred.
Designed for straightforward FDM printing
The manufacturer positions PLA Pro as an easy-to-print material with improved toughness and layer bonding compared with conventional PLA. Its low tendency to warp makes it useful for detailed shapes and longer prints, while the controlled filament diameter helps the extruder feed a consistent amount of material. Keep the filament path clear and check the first layer before leaving a print to run.
PLA Pro can be used for educational models, decorative objects, fit checks and functional prototypes. Choose orientation, wall count and infill for the job, then test the finished part under its actual conditions. This is not a promise that any printed shape will carry a particular load. Manufacturer family photographs show example prints and equipment; the aircraft, controller, printer and other finished objects are not included. Only the Black filament spool is supplied.
Starting settings and storage
INSLOGIC gives a nozzle range of 195-205°C for printing at 50-100mm/s, and 205-220°C for 100-300mm/s. The upper speed depends on the printer's flow capacity, geometry and chosen layer height. A 300mm/s setting is a supported tuning target, not a guaranteed result on every printer. The manufacturer lists a 50-60°C bed, 100% cooling fan, and textured PEI or cool-plate surfaces as starting references.
Use an appropriate PLA profile and adjust temperature, cooling, retraction and first-layer settings for your own machine. For moisture care, the manufacturer's drying reference is 50°C for four hours. Keep unused material dry, cool and away from direct sunlight. INSLOGIC states compatibility with suitable Bambu Lab AMS and A1 mini setups. Confirm that the spool and filament path suit your particular printer arrangement.
Specifications
| Brand / material | INSLOGIC PLA Pro |
|---|---|
| Colour | Black |
| Filament diameter | 1.75mm ±0.02mm |
| Net filament weight / nominal length | 1kg / 320m |
| Nozzle temperature | 195-220°C, adjusted to speed |
| Bed temperature | 50-60°C |
| Drying reference | 50°C for 4 hours |
| Tensile strength | 56MPa |
| Elongation at break | 20.3% |
| Flexural strength / modulus | 85.8MPa / 2795MPa |
| Notched Izod impact strength | 20.1kJ/m² |
| Hardness / density | 83 Shore D / 1.20g/cm³ |
| Heat deflection temperature | 55°C at 0.45MPa |
| Package contents | 1 x 1kg Black PLA Pro filament spool |
Use notes
These mechanical and thermal figures are manufacturer laboratory references. Printed properties vary with geometry, orientation, settings and temperature. The heat-deflection value is not a continuous service-temperature approval. Test any part exposed to heat or sustained force. Work in a ventilated printing area and avoid contact with the hot nozzle and bed.