
INSLOGIC PETG Pro Grey Filament, 1.75mm, 1kg
INSLOGIC PETG Pro is a glycol-modified PET filament for FDM 3D printers that use 1.75mm material. This listing supplies one 1kg spool in Grey. It is the PETG Pro formulation, not standard SUNLU PETG, PETG-CF or an unspooled refill. The neutral grey finish suits practical prototypes, brackets, housings and other models where a plain colour keeps attention on the shape and fit of the part.
A practical material for functional prints
The manufacturer designed PETG Pro to combine straightforward printing with a balance of toughness, stiffness and flexibility. Reduced shrinkage and good layer adhesion can help when printing long parts or larger models, provided the machine and first layer are set up correctly. The surface has a softer sheen than many conventional PETG materials. It is not a guarantee of a completely matte finish on every shape or printer.
INSLOGIC lists prototypes, fixtures, moulds and large-format objects among its intended applications. Choose wall thickness, orientation and infill for the loads your own part will see, then test it before use. The photographs show the Grey spool and examples from the PETG Pro family, including other colours. Printed objects, printer hardware, holders and tools are illustrations and are not included.
Printing and moisture care
Start with the manufacturer's temperature range and tune a small test part. PETG Pro is advertised for speeds up to 600mm/s on suitable equipment, but reaching that figure depends on the printer's hotend flow, nozzle, geometry and chosen layer height. A high speed setting alone does not ensure a clean print. The manufacturer pairs 230-240°C with 50-100mm/s, 240-255°C with 100-300mm/s, and 255-270°C with 300-600mm/s.
Use a 60-70°C heated bed and a suitable build surface. INSLOGIC recommends drying at 55°C for four hours before printing and keeping moisture away during long prints. Store unused filament in a sealed, dry environment. Tune retraction, cooling and first-layer settings for your own printer rather than treating the guide as a universal profile. The material is compatible with suitable Bambu Lab AMS and A1 mini setups according to the manufacturer.
Specifications
| Brand / formulation | INSLOGIC PETG Pro |
|---|---|
| Colour | Grey |
| Filament diameter | 1.75mm ±0.02mm |
| Net filament weight | 1kg |
| Nominal length | 300m |
| Nozzle temperature | 230-270°C, adjusted to speed and printer |
| Bed temperature | 60-70°C |
| Drying reference | 55°C for 4 hours |
| Tensile strength | 50MPa |
| Elongation at break | 34.53% |
| Flexural strength / modulus | 81.9MPa / 2750MPa |
| Heat deflection temperature | 72°C at 0.45MPa |
| Package contents | 1 x 1kg Grey PETG Pro filament spool |
Use notes
Mechanical and thermal values are manufacturer laboratory results. Printed properties vary with geometry, orientation, temperature and settings, so validate the finished part for its intended use. Keep hands clear of hot printer components and provide suitable ventilation. Do not assume food-contact, medical, electrical-insulation or safety-critical approval from the material name or an example application.