
INSLOGIC Nylon-Like Tough Resin, Black, 1kg
INSLOGIC Nylon-Like Tough Resin is a UV-curing material for resin-printed prototypes and functional models that need a balance of stiffness and flexibility. This listing supplies one 1kg bottle in Black. It is the Nylon-Like Tough formulation, not INSLOGIC Tough Resin, SUNLU PA-Like Resin or nylon filament. The name describes the intended behaviour of the cured resin; it does not mean that this is a spool of thermoplastic nylon.
For parts that need some give
The formulation is intended to reduce the brittle feel associated with many general-purpose printing resins. INSLOGIC describes applications including brackets, jigs, fixtures, gears, architectural models and practical tools. Its combination of elongation and impact resistance can be useful when a prototype must be handled repeatedly or fitted together during development. Actual part performance depends on the design, wall thickness, orientation, support placement, exposure and curing process.
Black gives mechanical models a consistent dark finish. The photographs show the Black bottle together with application examples from the same resin family. Printed objects, other colours, tools and display accessories in those photographs are illustrations and are not included. A printed example is not a certification of a part for load-bearing use. Do not use an untested print for climbing, lifting, personal protection or other safety-critical applications.
Printer compatibility and preparation
Use a compatible LCD, SLA or DLP resin printer with a wavelength in the 385-405nm range. Shake and stir the resin well before use. Begin with the manufacturer's guidance for your printer and run an exposure test before committing to a full build. The manufacturer gives 0.05mm layers and five to ten bottom layers as starting guidance, with exposure adjusted to the screen type. These are tuning references rather than a universal profile for every printer.
Wash and post-cure the model according to the current manufacturer instructions. Inspect fit and flexibility after curing, not only immediately after removing the print from the plate. Low shrinkage does not mean zero dimensional change. The specification values below come from the manufacturer's detailed technical table. They are laboratory results, not guaranteed properties for every finished geometry, and may vary with machine settings, temperature and print direction.
Specifications
| Brand / formulation | INSLOGIC Nylon-Like Tough Resin |
|---|---|
| Colour / net weight | Black / 1kg |
| Curing wavelength | 385-405nm |
| Compatible printer types | LCD, SLA and DLP resin printers |
| Tensile strength | 35MPa |
| Elongation at break | 32% |
| Flexural strength | 45MPa |
| Flexural modulus | 1060MPa |
| Notched Izod impact strength | 85J/m |
| Heat deflection temperature | 50°C at 0.45MPa |
| Shore hardness | 83D |
| Package contents | 1 x 1kg bottle of Black Nylon-Like Tough Resin |
Handling and storage
Low odour does not mean harmless. Wear nitrile gloves and eye protection, work in a well-ventilated area, and avoid skin and eye contact with uncured resin. Keep the container closed in a cool, dry place away from heat, sunlight, food, children and pets. Do not pour resin or contaminated wash liquid into a drain. Follow the safety data sheet and local disposal rules. This resin is not approved for food, drink or medical use on the human body.