
INSLOGIC MetalFill PLA Gold 1kg Filament
INSLOGIC MetalFill PLA in Gold is a PLA-based material for printing decorative parts with a metallic-looking finish. It combines a PLA base with metal powder to create a satin metallic effect. This listing supplies one spool containing 1kg of 1.75mm Gold filament. It is designed for compatible FDM and FFF printers, rather than resin printers or machines that require a different filament diameter.
The warm gold shade suits display models, costume props, ornaments, trophies and presentation prototypes. Curved surfaces, engraved details and raised edges reflect light differently, so the appearance will vary with the model shape and the lighting. A smaller layer height and careful surface orientation can help show fine detail. The printed objects in the gallery illustrate possible applications; they are not supplied with the spool.
Printing and calibration
INSLOGIC gives a starting nozzle range of 200-230°C and a heated-bed range of 50-60°C. Its reference guidance includes 0.4mm and 0.6mm nozzles, full cooling and a maximum printing speed of 200mm/s. These are starting points for tuning, not a promise that every machine can print every model at the upper speed. Begin with a small test piece, check the first layer and adjust temperature, flow and speed for your printer.
Use a clean build surface and confirm that the spool can rotate freely on its holder. Check the instructions on the supplied spool before a long print. The metallic effect is a visual property of this PLA material. It does not establish electrical conductivity, the heat resistance of a metal part or suitability for safety-critical service. Test any functional prototype against its actual operating requirements.
Moisture care and storage
If moisture affects extrusion, the manufacturer gives a drying reference of 50°C for four hours. Use a controlled filament dryer and follow the supplied spool instructions. Secure the free end after unloading so it cannot slip under another turn, then store the spool sealed in a dry place away from dust and excessive heat. Good storage and a tuned printer help keep results consistent between projects.
The main image identifies the Gold spool. Shared manufacturer application photographs may show other colours from the MetalFill PLA family; this is not a mixed-colour bundle. Original reference guides in the gallery explain the supplied material and starting settings. Printers, printed models, tools and other props are not included.
Specifications
| Brand | INSLOGIC |
|---|---|
| Material | MetalFill PLA, metal powder-infused PLA |
| Colour | Gold |
| Filament diameter | 1.75mm |
| Net filament weight | 1kg |
| Printer type | Compatible 1.75mm FDM / FFF printers |
| Nozzle temperature reference | 200-230°C |
| Bed temperature reference | 50-60°C |
| Printing speed reference | Up to 200mm/s; tune for the printer and model |
| Nozzle sizes in manufacturer guidance | 0.4mm / 0.6mm |
| Cooling reference | 100% |
| Drying reference | 50°C for 4 hours |
| Package contents | 1 x INSLOGIC MetalFill PLA Gold 1kg filament spool |