
High-precision digital MEMS microphone module built around the InvenSense INMP441. The chip outputs audio as a 24-bit I2S digital stream, so it connects directly to the I2S port of an ESP32, STM32 or similar microcontroller - no analog front end, codec or noisy ADC readings needed. A solid choice for voice capture, sound-level monitoring, audio recording and ML keyword-spotting projects.
Key Features
- InvenSense INMP441 omnidirectional MEMS microphone on a compact round breakout board
- Digital 24-bit I2S output - no external ADC or codec required
- Supply voltage: 1.8V to 3.3V (run the module at 3.3V)
- Low power: about 1.4 mA typical supply current
- Sensitivity: -26 dBFS at 94 dB SPL, 1 kHz
- Signal-to-noise ratio: 61 dBA
- Acoustic overload point: 120 dB SPL
- Frequency response: 60 Hz to 15 kHz
- Header pins: VDD, GND, L/R (channel select), SCK (bit clock), WS (word select) and SD (serial data out)
- Works with microcontrollers that have an I2S peripheral, such as ESP32 and STM32 (not Arduino Uno)
Package Includes
- 1 x INMP441 I2S MEMS microphone module
Useful Links
Official and reference resources for the INMP441 in this module: