
74HC30 8-Input NAND Gate IC
The 74HC30 combines eight digital inputs into one NAND output. Its output Y goes LOW only when all eight inputs are HIGH. If any input is LOW, Y is HIGH. This is one eight-input gate, not an eight-gate IC.
The 14-pin through-hole DIP package is suitable for compatible breadboards, sockets and PCBs. Use it to combine several logic conditions in digital experiments, status-checking circuits and control logic.
Features
- Single NAND gate with eight inputs A to H.
- Implements NOT (A AND B AND C AND D AND E AND F AND G AND H).
- HC CMOS logic family.
- DIP-14 through-hole package.
- One logic output Y.
Specifications
| Part family | 74HC30 |
| Function | Single 8-input NAND gate |
| Inputs | 8 |
| Outputs | 1 |
| Package | DIP-14, through-hole |
| HC-family supply range | 2V to 6V; confirm the supplied manufacturer's datasheet |
| Supply pins | VCC pin 14; GND pin 7 |
| Output pin | Y pin 8 |
| Not connected | Pins 9, 10 and 13 |
Input pin reference
A: pin 1; B: pin 2; C: pin 3; D: pin 4; E: pin 5; F: pin 6; G: pin 11; H: pin 12.
Connecting the IC
Verify notch orientation and pin numbering before powering the circuit. Use HC-compatible logic levels and keep signals within the permitted supply range. Add a 0.1uF bypass capacitor close to VCC and GND. Inputs not needed for a reduced-input NAND function should be held HIGH; never leave logic inputs floating. Leave NC pins unconnected. Check actual-part timing, current and output loading before connecting other circuits. This is a logic gate, not a power driver.
Package includes
1 x 74HC30 DIP-14 IC. Photos show representative marked MC74HC30 DIP-14 packages; manufacturer and batch markings may vary. The pinout, function and connection images are original illustrative references based on the TI CD74HC30 datasheet, not photographs of supplied stock.