
74HC27 Triple 3-Input NOR Gate IC
The 74HC27 contains three independent NOR gates, each with three logic inputs and one output. A gate's output is HIGH only when all three of its inputs are LOW. Any HIGH input makes that gate's output LOW.
This HC-family logic IC comes in a 14-pin through-hole DIP package for compatible breadboards, sockets and PCBs. It is useful for learning Boolean logic, combining digital conditions and building simple signal-control circuits.
Features
- Three separate 3-input NOR gates in one IC.
- Each output implements NOT (A OR B OR C).
- HC CMOS logic family.
- DIP-14 through-hole package.
- Common supply pins for all three gates.
Specifications
| Part family | 74HC27 |
| Function | Triple 3-input NOR |
| Gates | 3 independent gates |
| Inputs per gate | 3 |
| Outputs | 3, one per gate |
| Package | DIP-14, through-hole |
| HC-family supply range | 2V to 6V; confirm the supplied manufacturer's datasheet |
| Supply pins | VCC pin 14; GND pin 7 |
Gate pin reference
| Gate | A | B | C | Y |
|---|---|---|---|---|
| 1 | 1 | 2 | 13 | 12 |
| 2 | 3 | 4 | 5 | 6 |
| 3 | 9 | 10 | 11 | 8 |
Use and handling
Use HC-compatible logic levels and keep input voltages within the permitted supply range. Verify timing and output loading in the actual part's datasheet. Add a 0.1uF bypass capacitor near VCC and GND. Tie unused inputs to a defined HIGH or LOW level; leave unused outputs unconnected. Check the notch and pin numbering before powering the circuit. Do not connect outputs together or use this logic IC to drive motors or other power loads directly.
Package includes
1 x 74HC27 DIP-14 IC. Photos show representative marked SN74HC27 DIP-14 packages; manufacturer and batch markings may vary. The pinout, truth table and gate-map images are original illustrative references based on the TI SN74HC27 datasheet, not photographs of supplied stock.