
74HC126 Quad 3-State Buffer IC
The 74HC126 contains four independent non-inverting digital buffers in a 14-pin through-hole DIP package. Each channel has its own active-high output-enable input, making the IC useful for controlling when a signal reaches a shared digital connection.
How it works
When a channel's OE input is HIGH, its output Y follows input A. When OE is LOW, Y enters a high-impedance state. High impedance is an electrically released output, not a logic LOW. The 74HC126 uses active-high enables; do not confuse it with the active-low-enable 74HC125.
Features
- Four separately controlled, non-inverting buffer channels.
- 3-state outputs for digital signal gating and bus interfaces.
- HC CMOS logic family.
- DIP-14 through-hole format for compatible breadboards, sockets and PCBs.
Specifications
| Part family | 74HC126 |
| Function | Quad non-inverting buffer with 3-state outputs |
| Channels | 4 |
| Output enable | Active HIGH, separate for each channel |
| Package | DIP-14, through-hole |
| HC-family supply range | 2V to 6V; confirm the supplied manufacturer's datasheet |
| Supply pins | VCC: pin 14; GND: pin 7 |
Channel pin reference
| Channel | OE | A | Y |
|---|---|---|---|
| 1 | 1 | 2 | 3 |
| 2 | 4 | 5 | 6 |
| 3 | 10 | 9 | 8 |
| 4 | 13 | 12 | 11 |
Use and handling
Check notch orientation and pin numbering before powering the circuit. Use a 0.1uF bypass capacitor close to the supply pins. Tie unused inputs to a defined logic level and leave unused outputs unconnected. Match signal voltages, loading and timing to the actual part's datasheet. This is a logic IC, not a motor driver or general-purpose power buffer.
Package includes
1 x 74HC126 DIP-14 IC. The photo shows a representative marked 74HC126 package; manufacturer and batch markings may vary. The other gallery images are original illustrative references based on the TI SN74HC126 datasheet and are not photographs of supplied stock.