
The XH-W3002 is a compact digital thermostat that switches heating or cooling equipment up to 1500W on 110-220V AC. A bright 3-digit red LED display shows the live temperature from the included waterproof NTC 10K probe (1 metre cable), and three front buttons let you set the start and stop temperatures in a few seconds.
Control range is -50 to 110 degrees C with 0.1 degree C setting accuracy and 0.5 degree C sensing accuracy. The onboard 10A relay drives aquarium heaters, incubators, water heaters, fans, seedling mats and refrigeration compressors directly, with no external contactor needed for loads within rating.
Menu functions include P0 heating or cooling mode, P1 hysteresis (difference) setting, P2 temperature calibration offset, P3 compressor delay start, P4 set value alarm and high and low temperature alarm outputs. All settings are saved in non-volatile memory and survive power cuts.
- Model: XH-W3002
- Supply: AC 110-220V, 50/60Hz
- Output: 10A relay, up to 1500W
- Range: -50 to 110°C, accuracy 0.1°C (setting)
- Sensor: waterproof NTC 10K probe, 1 m cable, B=3435
- Display: 3-digit red LED, 0.28 inch
- Size: 60 x 45 x 31 mm with snap-in panel tabs
- Power consumption: under 3W